|
|
|
|
|
|
Seba PS-Light 2C
Product Features
- compact, robust measurement system for measurement of water level in accordance with the bubble gauge principle
- high accuracy (0.05% FS) and long-term stability through smart sensor drift compensation
- Measuring ranges: 0-10 m (standard), Option: 0-15 m, 0-20 m, 0-30 m, 0-40 m, 0-70 m
- Low energy consumption through optimised pump control
- wide range of output signals (0-1 V, 0-5 V, 0/4-20 mA, RS485, SDI12, BCD, Binary, Grey) for uncomplicated connection to external data collectors or to process control systems (SPS)
- easy installation in the existing water level stations, protective housing or control cabinets
- optionally available with integrated data collector, type PS-Light-2C, as well as a GSM modem for remote data-transmission, type PS-Light-2C GSM
|
| |
|
|
SEBA LevelSense
Product Features
- Reliable and robust shaft encoder
- Outputs: 0/4...20mA, SDI12, SHWP(RS485)
- Integrated LC-Display (option)
- Cost effective modernization of existing water level monitoring stations
- Internal battery supply for buffer in case of power failure
- Continuous registration of water level fluctuations in ground- and surface waters
- With integrated data logger (option)
|
| |
|
|
Seba DS-22 / DS-T 22
Product Features
- Seba DS-22 / DS-T 22 is sensors for water level and temperature measurements.
- High accuracy (< 0,1%).
- Outputs: 0-1V, 0/4-20 mA oder RS 485.
|
| |
|
| | |
| | |
|
|
SEBA Puls
Product Features
- SEBA Puls is radar sensor for contact free water level measurement in rivers, channels and reservoirs.
- Contact free measurements from bridges.
- No temperature or weather influence to the accuracy.
- Range: 0-15, 35, 70 m.
- Accuracy: better 1 cm
|
| |
|
|
Gaugekeeper
Product Features
- Patended system
- Redundant data
- Real-time measurement
- Alarm & alert procedure (definable)
- Visual verification of data
- Direct human interpretation
- Historical data can be downloaded (value + image)
- No more expensive trips to remote measuring sit
- TCP/IP connectivity
|
| |
|
|
Eijkelkamp 12.06 Van Dorn Water Samplers
Product Features
- Has been specially designed for the sampling of open water.
- Eijkelkamp 12.06 Van Dorn Water Samplers suitable for sampling coastal waters and for the analysis for heavy metals.
- The vertical water flow through is not hindered by constrictions so that no appreciable contamination can occur in shallow water.
- Also suitable for measuring parameters in water with solid particles or constituents bound to them, possibly in large quantities.
- Holds 2.2 litre.
|
| |
|
| | |
| | |
|
|
Eijkelkamp 12.07 Kemmerer Water Sampler
Product Features
- Eijkelkamp 12.07 Kemmerer Water Sampler used for general water sampling in lakes, channels, wells and the sea.
- Consists entirely out of plastic parts so that there is no risk of the sample coming into contact with metal.
- Holds 1.2 litre.
- Not suitable for chemical sampling for micro-parameters.
|
| |
|
|
Eijkelkamp Grundfos MP 1
Product Features
- The ultimate 2” submersible pump for purging and sampling monitoring wells up to a depth of 85 meters.
- Submersible pump MP1, centri- fugal type f. purging/sampling monitoring wells
- Stainless steel 316
- Pressure head lift max. 86 m
- Adjust. cap. till max. 1.8 m3/h, 220 V 1.1 kW, for connection to frequency converter
- Pump Ø 45 mm
- 287 mm long
- Teflon cable 20 m
|
| |
|
|
Sludge Judge® Ultra Sampler, 15'L complete
Product Features
- Constructed of extremely strong polycarbonate that is treated with an ultraviolet stabilizer to help reduce deterioration from the sun's harmful rays.
- Very rigid material minimizes bending of the unit when it's full of water or other liquids.
- Durable in cold temperatures, plus it can withstand heat up to 280°F (138°C) with careful handling.
- The 3/4"-dia. tubing is marked with blue tape in 1' increments.
- The 15'L Sludge Judge Ultra sampling pole is made up of three 5'L sections (top, extension, bottom).
|
| |
|
| | |
| | |
