Soil

   
««First   «Prev   [1]  [2]  [3]  [4]  [5]  [6]  Next»  Last»»
Soil stirrer
Eijkelkamp 98.23 Soil Stirrer

Product Features
 
  • Eijkelkamp 98.23 Soil Stirrer device for the mixing of soil/water solutions using an electrically powered fourpart blade, 230 V - 50 Hz.
  • The number of rotations can be set either on 10.000, 14.000 or 17.000 rotations per minute.
  • The apparatus is fitted with an automatic start/stop function.
  • The engine is placed in a rubber support reducing noise and vibrations to a minimum.
  • Supplied inclusive a mixing beaker with a contents of 1 liter.
  • Additional mixing beakers can be obtained separate.






Pressure / Vacuum Hand Pump
Soil Moisture Pressure / Vacuum Hand Pump

Product Features
 
  • Soil Moisture Pressure / Vacuum Hand Pump provides vacuums up to 0.9 bar (90 kPa) and pressures up to 60 psi (500 kPa) up to 50 feet.
  • Includes pump, 0-100 cb recalibrator-style vacuum dial gauge, fittings, and inline filter






Auger Edelman coarse sand
Eijkelkamp Auger Edelman Coarse Sand

Product Features
 
  • Allows minimum friction during soil penetration.
  • Less physical effort for the extraction from soil.
  • Blades have extra wings thus forming an almost closed auger that will firmly keep hold of loose soils such as coarse sand or very dry sandy soils.
  • Eijkelkamp Auger Edelman Coarse Sand available in several diameters, and/or various connection.
  • Standard bayonet connection or a conical screw thread connection.






Van Veen Grabs
Eijkelkamp 04.30 Van Veen Grabs

Product Features
 
  • Eijkelkamp 04.30 Van Veen Grabs used for taking disturbed samples from the bottom of lakes, rivers, etc.
  • Various designs can be supplied. The smaller designs are manually controlled.
  • At the surface the jaws are pushed open and kept in that position by a hook. To keep the hook in the right position the Van Veen grab should be sunk at a steady, not too high, pace.
  • Both jaws are fitted with holes to allow air to escape during the sinking. If these holes were not there, the air would escape when taking the sample, which would result in interference with the sample.
  • As soon as the jaws touch the bottom, the hook loosens its grip, so that, when hoisting the rope again the jaws will shut tight because of the leverage by the rods.
  • The amount of drawn sample mainly depends on the compactness of the bottom. A heavier grab catches more than a lighter one. Therefore all models have been fitted with weighting blocks. Moreover, when a strong current prevails, the cable of the heavier grab deviates less from the vertical than the lighter one.
  • Recommended to take at least 6 samples from every location and to base your conclusion on the total of the samples.
  • In spite of the heavy closing force, it can happen that a pebble sticks between the buckets. In such case the sample is not representative; the smaller parts may have excaped during hoisting. Once surfaced, the grab is emptied and cleaned.






Air permeameter
Eijkelkamp 14.34 Air Permeameter

Product Features
 
  • Includes a standard air permeameter for connection to various chambers.
  • Measuring range of 0.003 - 3 cm/sec.
  • Has a built-in data logger and RS 232 output.
  • Eijkelkamp 14.34 Air Permeameter equipped with an electronic balance and a connection plug for a tensiometer and soil moisture sensor.
  • Supplied together with software and charger.
  • In the set 3 different chambers are included to measure homogeneous flow (with integrated pressure sensor) and heterogeneous flow in undisturbed soil (in 250 cc soil sample rings with diameter 84 mm).






Samplers With Glass / Plastic Cup
Eijkelkamp 12.52 Samplers With Glass / Plastic Cup

Product Features
 
  • Eijkelkamp 12.52 Samplers With Glass / Plastic Cup is soil water sampler set with conical porous glass suction cup are developed for the examination of organic solutions in soil.
  • The borosilicate porous part has an extreme low sorption of agricultural control chemicals, total carbon, phosphate and PAH’s.
  • The standard set comprises: 3 samplers with diameter 22/16 mm, length 30, 60 and 90 cm, sample bottles with silicon stoppers, vacuum pump and soil insertion auger set.
  • Soil water sampler set with porous plastic suction cup was developed for the examination of anorganic solutes in soil, especially for those with high sorption coefficients like heavy metals and phosphate.
  • Its porous part is a sandwich construction consisting of a nylon membrane filter and a porous polyethylene substructure.
  • The set consists of: 3 samplers, diameter 20 mm, length 30, 60 and 90 cm, sample bottles with silicon stoppers, vacuum pump and soil insertion auger set.






Auger Edelman Sand
Eijkelkamp Auger Edelman Sand

Product Features
 
  • Allows minimum friction during soil penetration.
  • Less physical effort for the extraction from soil.
  • Eijkelkamp Auger Edelman Sand suitable for moderately cohesive soils, such as sandy soils.
  • Elongated, twisted bit ensures easy entering.
  • Blades are broader than those of combination type, allowing a good hold of the soil.
  • Available in several diameters, and/or various connections.
  • Standard bayonet connection or a conical screw thread connection.






Van Der Horst Core Sampler
Eijkelkamp 04.14 Van Der Horst Core Sampler

Product Features
 
  • Eijkelkamp 04.14 Van Der Horst Core Sampler used for manual filling of the stainless steel sampling tubes. Sampling can take place in bore holes, casing tubes (minimum diameter 75 mm) or in the beds of canals, lakes, etc. up to a depth of approximately 10 m.
  • Entered into the bore hole using extension rods.
  • The core sampler can be beaten into the soil using the steel hammer with nylon head or using a falling hammer (type down the hole).
  • When the sample enters the tube, the water or air above the sample can escape through a non-return valve.
  • After sampling the apparatus with the filled tube is extracted from the soil using the support and lever beam with rope catcher.
  • The standard set contains a handle with beating head, extension rods, a steel hammer with nylon heads, a falling hammer (type down the hole), a Van der Horst core sampler, sampling tubes with and without core catcher, plastic sampling liner, sampling tubes, PE covers, a hydraulic extruder and various accessories.
  • Complete set is delivered in an aluminium transport case.






Special Sampling Plate
Soil Moisture Special Sampling Plate

Product Features
  • Soil Moisture Special Sampling Plate the large scale (22-inch diameter) vacuum plate provides a tremendous amount of surface space to control suction or sampling on a big scale.
  • Samples or growing plants can be placed on one of these large plates and induce the matric suction required up to 1 bar of suction.
  • A complete, "system level" vacuum plate assembly, which is also extremely easy to use, and install.
  • Simply wet up the samples on the plate, tie into a vacuum reservoir and pull the suction level required - it couldn't be easier.
  • Comes with 5 removable legs and a hose connector on the bottom of the plate.






Spiral Auger
Eijkelkamp Spiral Auger

Product Features
 
  • Operates similar to a corkscrew and does not cut off the soil.
  • Eijkelkamp Spiral Auger to penetrate hard layers e.g. boreore, brick layers, chalk and lime profiles in combination with other auger types at greater depths.
  • Has a negative end, i.e. the centre of the auger end is whetted away.
  • Single spiral auger is standard equipped with a contact for electrodes.
  • Available in several diameters, and/or various connections.
  • Standard bayonet connection or a conical screw thread connection.