Soil & Sediment Sampling

   
««First   «Prev   [1]  [2]  [3]  Next»  Last»»
Soil corer for soils with volatile components
Eijkelkamp 14.10 Soil Corer For Soils With Volatile Components

Product Features
 
  • Eijkelkamp 14.10 Soil Corer For Soils With Volatile Components  compact, multifunctional corer for taking soil samples (possibly containing volatiles).
  • The 16-ml (about 25 g) soil samples are cut from above the ground surface. They can then be packed so that they are protected from sorption (without synthetic materials), leakage and diffusion, and are then refrigerated or frozen. Analysis subsequently takes place within 48 hours or two weeks. 
  • The methanol conservation method can also be used. An ejector presses the sample directly into methanol. The soil corer can be hammered into stony soil samples without problems. The stainless steel sample tubes do not wear and can (after cleaning) travel everlasting back and forth between laboratory and field.

 







Soil coring kit for chemical soil research
Eijkelkamp 04.16 Soil Coring Kit For Chemical Soil Research

Product Features
 
  • Eijkelkamp 04.16 Soil Coring Kit For Chemical Soil Research for the determination of the presence of very volatile components such as benzene, toluene, xylene and  chlorinated hydrocarbons should be executed with samplers that prevent the sample from being exposed to air.
  • Sampling must be done without disturbance of the soil aggregates to prevent mixing with air.
  • With the special coring kit, volatilization and oxidation of components in soil samples can be prevented as much as possible. The sample under no condition comes in touch with synthetic material. The method meets the NEN 5743 norm (soil or sediment sampling with volatile components).
  • The sample has a volume of 226 ml. Therefore, suitable for the determination of volume percentages of  humidity in samples from undisturbed soil.
  • The samples are taken with a small coring apparatus fitted with thin-walled   stainless steel sample tubes. The sampling tubes preferably are pushed into the soil; possibly a steel hammer with nylon heads can be used.
  • After taking the sample, the sample tubes can be locked and cooled for transport to the laboratory. Here sub-samples can be taken from the sample tube, applying a small gauge or apple-corer. The samples can also be removed using an extruder. After decontamination the equipment can be used again.
  • The set contains an Edelman auger to pre-bore or clean the bore hole, in various types of soil, a stainless steel soil coring apparatus with a number of sample tubes, filling blocks and insulation plates. Further bottom caps, a sample extruder and maintenance material.
  • Complete set is packaged in an aluminum transport case.
  • To take samples to a depth of more than 5 m.






Liner sampler set
Eijkelkamp 04.15.SA Liner Sampler Set

Product Features
 
  • In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle.
  • Undisturbed soil samples can be taken in a liner applying a stainless steel core sampler with sample tubes and cutting head.
  • In hard soils the sampler tube can be driven into the soil using the hammer with two nylon heads (shock-absorbing) or the down-the-hole hammer.
  • The sets, which packed in an aluminium transport case, contain a hand auger for pre- and clean drilling of the bore hole, the core sampler with the sampler tubes and soil sample containers and maintenance equipment.
  • Eijkelkamp 04.15.SA Liner Sampler Set is easy to remove the sample from the tube.  
  • The sample, still in the liner, is stored in a container which can be sealed, for transport to the laboratory.







Split tube sampler
Eijkelkamp 04.17 Split Tube Sampler

Product Features
 
  • For rapid undisturbed sampling at the surface.
  • Eijkelkamp 04.17 Split Tube Sampler suitable for research on root systems, fertilizing and soil biology.
  • The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel lifting jack with lever and chain.
  • The split tube sampler consists of two stainless steel tube halves with a working length of 40 cm. Undisturbed sampling often poses a problem when removing the sample from the sampling tube. With this type of auger, both parts can be easily separated.
  • The sample is located (loose or in the liner) in the detachable tube.
  • Can easily be opened for immediate research of the sample or transport of the sample to the laboratory.
  • Recommended (in order to obtain representative samples) to decontaminate the apparatus after every sampling.






Sample ring kit
Eijkelkamp 07.53.SA Sample Ring Kit

Product Features
 
  • Model SA, used to take soft soils to a depth of up to 2 m.
  • Eijkelkamp 07.53.SA Sample Ring Kit applied to fill the soil sample rings in soft soils above the groundwater level.
  • The open ring holder is fitted with a bayonet connection and is driven into the soil manually.
  • The set contains an open ring holder, an Edelman- and a Riverside auger, a handle and extension rods, an aluminium case with soil sample rings, various accessories and a carrying bag.
  • Can be obtained for soil sample rings with a diameter of 53 (standard) and 60 mm. 

 







Core Cutter Method
Eijkelkamp 08.09 Core Cutter Method

Product Features
 
  • Eijkelkamp 08.09 Core Cutter Method used for works of civil engineering construction.
  • Only suited for material without stones.
  • Used for the determination of the density and the soil moisture content of embankment- or foundation material accoring to the Dutch RAW-standard 2000.
  • With a drop weight and a guide cylinder a special stainless steel sample ring, with a diameter of 95.7 x 102 mm and a height of 81.5 mm, is hammered into the soil surface.
  • The sampled material is transported to the laboratory, where after weighing and drying, the density and soil moisture content is determined.
  • The standard set includes a stainless steel sample ring with cutting edge for non-cohesive material and one for clay and clayey light gravely sand, a collar for the sample ring, a guide cylinder for the drop weight, a drop weight, a frame for the guide cylinder a steel rule, a flat stainless steel plate, a flat brush and a water level.

 







Bi-Partite Root Auger
Eijkelkamp 05.02 Bi-Partite Root Auger

Product Features
 
  • Almost undisturbed, uniform soil samples can be taken in layers of maximal 15 cm.
  • Eijkelkamp 05.02 Bi-Partite Root Auger consists of a bottom part fitted with an exchangeable drilling-crown and a short unscrewable top part (handle) with a beating head.
  • In lighter soil the auger can be pushed and turned into the soil. In heavier soils an impact absorbing hammer can be used.
  • In the standard set an Edelman- and a Riverside auger have been included for reaming out the bore hole and levelling the bottom (making it even). A conical threaded connection is used.
  • The root auger is fitted with a sample extruder unit which forces the soil sample from the cylinder of the auger. The extruder unit is operated by means of a crank handle.
  • The complete root auger set is packaged in an aluminium transport case.






Peat Profile Sampler, Type Wardenaar
Eijkelkamp 05.09 Peat Profile Sampler, Type Wardenaar

Product Features
 
  • Eijkelkamp 05.09 Peat Profile Sampler, Type Wardenaar for sampling intact, undisturbed peat profiles in peat lands up to a depth of 1 meter.
  • Consists of a rectangular stainless steel box casing, divided lengthwise into two halves, with very sharp specially shaped cutting edges at the base.
  • The handgrip hinging with both halves allows both halves to be pushed into the soil alternatingly.
  • A clamp mechanism on the grip allows the profile to be clamped in the sampler when it is extracted from the soil.
  • A small diameter tube is fitted to break the suction of the sample.
  • The standard set contains the peat profile sampler, tools, lever beam with support and a hand pump.






Akkerman Core Sampler, Standard Set
Eijkelkamp 04.11 Akkerman Core Sampler, Standard Set

Product Features
 
  • Samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m.
  • Eijkelkamp 04.11 Akkerman Core Sampler, Standard Set used in combination with a tripod and hand winch.
  • The sampling tube is beaten into the soil using a falling hammer. After sampling the sampling tube can be sealed off with the PE covers.
  • A sample on the split sample tube can be prepared for transport by covering it with another split tube and sealing the seams and closing both ends with covers.
  • The hydraulic extruder can only be used to remove the sample from the ordinary sampling tubes. The tubes with core catcher cannot be emptied using this extruder.
  • The sample must be removed by tapping or by pulling the plastic liner in which the sample is bedded if the liner had been placed in the core catcher before sampling.
  • Using the connection set, which has not been included in the standard set, allows immediate leaching test in the laboratory, without the need to remove the sample from the sampling tubes first.
  • The standard set contains an Akkerman core sampler, a falling hammer, various sampling tubes with and without core catcher, plastic sampling liner, sampling tubes, PE covers and a hydraulic extruder for the sampling tubes.






Free-Fall Corer
Eijkelkamp 04.29 Free-Fall Corer

Product Features
 
  • Eijkelkamp 04.29 Free-Fall Corer for sampling fairly undisturbed sampling from the top layer of submerged sediments either or not consolidated.
  • Consists of a frame with strengthening ribs, falling weight and sampler.
  • Using a hoisting unit (davit) on board of a boat the sampler is lowered in free fall. By its own weight and velocity the apparatus penetrates the submerged soil.
  • The depth of penetration is partly determined by the composition of the submerged soil. In soils rich of mud, penetration will reach to about 80 cm, in more sandy soils this will be about 30 cm.
  • After lifting the sampler an immediate rough description of the stratification of the submerged soil is possible due to the transparent tube and also the depth of penetration can be measured.
  • Further description regarding the composition, colour, smell and particulars if any, is possible.