Soil Moisture measurement

   
««First   «Prev   [1]  [2]  [3]  [4]  [5]  [6]  Next»  Last»»
Hydrosense II Soil Moisture System
Hydrosense II Soil Moisture System

Product Features
 
  • Compact, highly portable soil measurement
  • Large LCD display for easy operation
  • Onboard data storage for up to 1500 points
  • Onboard GPS for geotagging measurements
  • Bluetooth connection to PC software
  • Export to Google Earth, GPX and CSV
  • Hydrosense II Soil Moisture System probe redesign for easy insertion and removal from soil






Eijkelkamp PlantCare Mini-Logger
Eijkelkamp PlantCare Mini-Logger

Product Features
 
  • Eijkelkamp PlantCare Mini-Logger is a maintenance-free sensor which records soil moisture and soil temperature.
  • A USB stick is used to easily program the mini-logger and readout the data.
  • PlantCare DataViewer Software allows a quick and easy display and analysis of the measured data.
  • Fields of application are scientific research, agriculture and garden and landscaping construction.
  • Measurement of soil moisture levels (rel. %) and soil temperature at freely selectable intervals.
  • Speedily reaction to changes in moisture levels.
  • Reliable results even at minimum depths (from 5 cm).
  • Value measured is unaffected by salt or fertilizer content.
  • Precise recording of measurements through built-in quartz clock.
  • A USB-interface allows programming the logger as well as readout the measured data.
  • Maintenance-free
  • Weatherproof IP67 housing






Quickdraw Tensiometers
Eijkelkamp 14.04.05 Quickdraw Tensiometers

Product Features
 
  • Eijkelkamp 14.04.05 Quickdraw Tensiometers is small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil.
  • The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes.
  • After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing immediate use in case of a next measurement.






253-L Watermark Soil Matric Potential Block for Multiple
253-L Watermark Soil Matric Potential Block for Multiple

Product Features
 
  • 253-L Watermark Soil Matric Potential Block for Multiple uses electrical resistance method for soil water matric potential measurement
  • Measurement range: -200 kPa to 0 kPa
  • Used with multiplexers connected between the data logger and the sensor






Takemura Soil PH & Moisture Meter DM15

Product Features
  • Takemura Soil PH & Moisture Meter DM15 An excellent concept, the DM15 Soil Tester is a fast and simple method of obtaining accurate values of both soil pH and moisture levels. The metallic electrode is simply inserted into the soil and the moisture or pH level can be checked on the dial. No more messy chemicals






Soil Moisture Measuring System With SM200 Sensor
Eijkelkamp 14.24 Soil Moisture Measuring System With SM200 Sensor

Product Features
 
  • Eijkelkamp 14.24 Measuring System With SM200 Sensor can handle both research and irrigation applications by achieving +/- 3% accuracy (with soil specific calibration).
  • Measuring range of 0-50 %vol.
  • Can have excellent temperature stability, low salinity sensitivity and accurate volumetric water content data.
  • Low cost.
  • Can be connected to a data logger for continuous monitoring applications.






Tensiometer Set
Eijkelkamp 14.04 Tensiometer Set

Product Features
 
  • Applied to execute different research with various types of tensiometers up to a depth of 90 cm.
  • Eijkelkamp 14.04 Tensiometer Set used in irrigation areas for permanent placement.
  • The Jet-fill tensiometer has an additional water reservoir in order to be able to continuously fill the tensiometer allowing it to be ready for use faster and more mobile.
  • For fast measurement of soil suction (usually in small areas) the quick draw tensiometer provides measuring results within minutes.
  • In case of all tensiometers the measuring values are read from the manometer.
  • In addition to tensiometers in various lengths the set also includes a service set as well as a gouge auger (to pre-drill a hole) with extension rod and a cleaning spatula.






Tensior 4 With Electronic Pressure Transducer
Eijkelkamp 14.04.09 Tensior 4 With Electronic Pressure Transducer

Product Features
 
  • The transducer is located at the bottom end of the tensiometer tube allowing it to be used also in case of frost (frost not too deep into the soil).
  • The pressure transducer can simply be combined with another length of tensiometer tube. This allows measurement at various depths.
  • Eijkelkamp 14.04.09 Tensior 4 With Electronic Pressure Transducer used for measurements in different positions.
  • Measuring range of -1000 till +850 hPa and an output signal of -100 till +85 mV (+/- 3 mV).
  • Power supply is 10.6 Vdc and current consumption 1.3 mA.






Electronic Tensimeter
Eijkelkamp 14.50 Electronic Tensimeter

Product Features
 
  • Eijkelkamp 14.50 Electronic Tensimeter is portable pressure sensor in a bag for measurement of the moisture tension in the soil, measured through a tensiometer tube placed in the soil.
  • The measuring device can be moved from tensiometer tube to tensiometer tube allowing an unlimited number of measurements over a short period of time.
  • The hypodermic needle of the tensimeter is fitted on the tensiometer tube through the silicon stopper after which the moisture tension can be read.
  • Measuring range of 0-1000 hPa with an accuracy of less than 2%.
  • Available in various lengths.






Jetfill Tensiometers
Eijkelkamp 14.04.04 Jetfill Tensiometers

Product Features
 
  • Has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism.
  • At a push of the button will instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air.
  • Eijkelkamp 14.04.04 Jetfill Tensiometers can be provided in different lengths as well.