Material Testing Instrument

   
««First   «Prev   [1]  [2]  [3]  [4]  Next»  Last»»
Dry Mixer
Dry Mixer

Product Features
 
  • The volume of the cone is 30 litres.
  • Mixing capacity: 10 Kg of material
  • Speed rotation: 30 rpm
  • Security cabinet required for CE markets
  • Designed to mix dry materials such as powders, cement, gypsum and granulated materials. In a short time it assures a perfect and homogeneous mixture. 
  • The mixer consists of two opposite asymmetric cones and a pan for collecting the mixed material. Supplied complete with timer.
  • Power supply: 230 V 50 Hz 1ph 750W
  • Dimensions: 700mm x 700mm x 1200mm
  • Weight: 130 Kg






Flakiness Sieve
Flakiness Sieve

Product Features
 
  • Slot width 4.9mm, length 30mm - passing 10mm, retained 6.3mm to BS812-105
  • Supplies a range of flakiness sieves all constructed from steel to meet the requirements of BS 812.






Elongation Gauge
Elongation Gauge

Product Features
 
  • Used to measure the length of individual particles and classify aggregate elongation to BS812-105






Flow Unit
Flow Unit

Product Features
 
  • For the measurement of the Flow coefficient of fine aggregate.
  • Designed to perform tests in accordance to EN 933-6.
  • The apparatus consists of a cylindrical tank mounted on a stand and 2 funnels with calibrated orifice.
  • Dimensions: 260mm x 270mm x 490mm
  • Weight:14 kg






Vibrating Table
Vibrating Table

Product Features
 
  • For the measurement of the Flow coefficient of aggregate.
  • The device is designed to perform tests in accordance to EN933-6.
  • The apparatus consists of a vibrating table mounted on a rugged base, a flow unit for coarse aggregates conforming to EN 933-6 and a sample of the reference material.
  • Supplied with a certificate of conformity.
  • Please note that he required voltage is 380V 3ph.
  • Dimensions: 400mm  x 400mm x 1400mm high






Grid Sieve
Grid Sieve

Product Features
 
  • A range of 14 different grid sieves are available from Impact.
  • The frames are painted steel with stainless steel bars.
  • Nominal dimensions: 300mm x 300mm x 70mm high. 






Fraas Apparatus
Fraas Apparatus

Product Features
 
  • This apparatus is used to determine the breaking point of semi-solid and solid bitumens.
  • It consists of a flexure device with two concentric sliding resin tubes, jaws for the test specimen, flexure system with handle, cooling device with three containers, plate in special harmonic steel, and a thermometer IP 42C.






Ductilometer
Ductilometer

Product Features
 
  • Used to determine the ductility of bitumen
  • The Ductilometer consists of a moving carriage driven by an electrical motor along guides inside a large tank which is fitted with digital thermostat, immersion electric heater, cooling coil for cold water circulation and pump unit.
  • This works automatically at a speed of 50 mm/minute. and its maximum stroke is 1500mm.
  • The tank and the external frame are manufactured from stainless steel with fibreglass insulation.
  • The ductilometer can accept up to 3 specimens simultaneously.
  • Power supply: 220-240V 50Hz 1ph 1000 W
  • Dimensions: 2140mm x 350mm x 400mm
  • Weight: 95kg






Loss On Heating Oven
Loss On Heating Oven

Product Features
 
  • This dual purpose oven is designed to perform the loss-on-heat test and thin film test for bitumen and asphaltic materials and complies to the requirements of BS 2000 ASTMD6, D1754 & AASHTO T47, T179.
  • The exterior is constructed from sheet steel finished in an easy clean powder coated paint and the interior chamber is made from stainless steel.
  • The unit is well insulated and has a double glazed window for viewing the test chamber.
  • The control system comprises of a microprocessor digital controller and overheat thermostat with calibrated scale and tamper proof lock.
  • Temperature is controlled and pre-set at 163C +/- 1C.
  • Two rotating shelves of 13.5 inches diameter are supplied to perform both the loss-on-heat test and thin film tests.






Marshall Test Load Frame
Marshall Test Load Frame

Product Features
 
  • It is a bench-mounted system with a motorised drive.
  • The speed is pre-set to 50.8 mm per minute.
  • Rapid platen adjustment is provided complete with a limit of travel safety switch.