Crops

   
««First   «Prev   [1]  [2]  [3]  [4]  [5]  [6]  [7]  Next»  Last»»
CID Portable Laser Leaf Area Meter (CI-202)
CID Portable Laser Leaf Area Meter (CI-202)

Product Features
 
  • Non-destructive measurement
  • Measures area, length, width, and perimeter and calculates shape factor and aspect ratio
  • High resolution of 0.1mm
  • No calibration required
  • Stores up to 8,000 single measurements
  • CID Portable Laser Leaf Area Meter (CI-202) easy to use
  • Lightweight and self-contained instrument with built-in data logger and LCD display
  • Rechargeable battery
  • Measures objects up to
  • USB port transfers data to computer






G-7
Delmhorst G-7

Product Features
 
  • Delmhorst G-7 to measure moisture content of grain at harvest time and while in storage.
  • Can even attach optional accessories to check moisture in bulk material and hay.
  • Moisture Range: 9%-30% MC, depending on the grain.
  • Built-in calibrations for barley, coffee, corn, flax, hay, oats, pasta, rapeseed, rough rice, rye, sorghum, soybeans, and wheat.
  • Built-in temperature correction over the range of 32 - 160° F (0 - 70° C).
  • Programmable offset to match elevator.
  • Stores up to 150 accumulated readings in user-defined batches by grain.
  • Displays the average and highest readings, and standard deviation and co-efficient of variance of stored readings.
  • Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
  • Built-in connector accepts any Delmhorst electrode.
  • Built-in calibration check.
  • Size: 7 1/4” x 6” x 5 1/2”.
  • Weight: 4 lbs.
  • Rugged construction ensures years of reliable use.
  • Optional sturdy plastic carrying case.
  • 9V battery.
  • 1-year warranty.






Bentho Torch
BBE Bentho Torch

Product Features
 
  • Real-time measurement of benthic algal concentrations.
  • A portable field instrument for the in situ quantification of chlorophyll-a fluorescence on different substrates such as stones and sediment.
  • No sample preparation is necessary.
  • A measurement takes up to only 20 seconds to perform.
  • BBE Bentho Torch  for measurement of algal concentrations via fluorescence
  • The intensity of the chlorophyll fluorescence is used to calculate the different algae as chlorophyll-a, namely green algae, blue-green algae (cyanobacteria) and diatoms.
  • The results are shown on the display and stored in the internal memory.
  • An encapsulated USB port enables the data to be transfer to a PC.
  • Allowing deployment in rough conditions.
  • Can be deployed down to a depth of 10 m.
  • Internal rechargeable batteries.






Fluoro Probe
BBE Fluoro Probe

Product Features
 
  • BBE Fluoro Probe for the analysis of chlorophyll with algae class determination.
  • Individual profiles during the measurements are taken for green algae, blue-green algae/cyanobacteria, diatoms/dinoflagellates and cryptophytes.
  • Possible interferences due to yellow substances are eliminated by an integrated CDOM correction factor.
  • Optional transmission sensor provides automatic turbidity correction.
  • Determine the chlorophyll content of different algae classes down to a depth of 100m (optionally 1000 m).
  • The measurement data can be displayed in real time on a PC or be stored in the probe for subsequent evaluation.






Algae Lab Analyser
BBE Algae Lab Analyser

Product Features
 
  • BBE Algae Lab Analyser simultaneous determination of chlorophyll concentrations, photosynthetic activity of chlorophyll and transmission
  • The detection of different algae classes via excitation using different coloured LEDs
  • Calculation of biomass on green algae, blue-green algae, brown algae (diatoms and dinoflagellates) and cryptophytes.
  • Direct measurement without sample preparation.
  • Determination of chlorophyll photosynthetic activity by using different excitation patterns; the common fluorescence signals are used via the Genty parameter method
  • Yellow substances (CDOM) measurement to correct the calculation of total chlorophyll
  • Integrated stirrer unit to prevent sedimentation during long-term measurements
     

 







Algae Guard
BBE Algae Guard

Product Features
 
  • BBE Algae Guard measurements are carried out automatically using pre-defined parameter settings immediately after boot-up or by pressing the start button on the touchscreen panel (right).
  • Continuous configuration by the operater is not necessary.
  • Maintenance is as low as 1 hour per month.
  • Parameters can be changed using the external bbe PC software if necessary.
  • Direct chlorophyll fluorescence corresponds to wet-chemical chlorophyll analysis
  • To simultaneously determine the content of chlorophyll according to green algae, blue-green algae, brown algae (diatoms and dinoflagellates) and cryptophytes
  • Allows the compensation of the influence of substances which cause turbidity
  • Yellow substances concentration (CDOM) 






Algae Online Analyser
BBE Algae Online Analyser

Product Features
 
  • BBE Algae Online Analyser is online chlorophyll analysis for measuring stations as well as for laboratory use.
  • Simultaneous determination of chlorophyll concentration, photosynthetic activity of chlorophyll and transmission.
  • Determination of different algae classes by excitation using coloured LEDs.
  • Calculation of the content of green algae, blue-green algae (cyanobacteria), brown algae (diatoms and dinoflagellates) and cryptophytes.
  • Direct measurement without sample preparation.
  • The photosynthetic activity of chlorophyll are calculated according to the Genty parameter method
  • Yellow substances measurement (CDOM) to correct the calculation of the content of chlorophyll.
  • Integrated cleaning unit to prevent growth of biofilms during prolonged measurements.
  • Can be switched from flow-through measurement to single measurement mode for laboratory operation






Algae Toximeter
BBE Algae Toximeter

Product Features
 
  • Continuously monitors water for the presence of toxic substances.
  • BBE Algae Toximeter for the precise determination of algal concentrations in water. 
  • Enables  the quantitative allocation to different spectral algal classes.
  • Measuring chamber is automatically cleaned by a piston after each measurement to prevent the growth of algae and biofilms.
  • Direct chlorophyll fluorescence corresponds to wet-chemical chlorophyll analysis
  • Determines the percentage of active chlorophyll under illumination (Genty method) and serves as a toxicity measurement
  • To simultaneously determine the content of chlorophyll according to green algae, blue-green algae, brown algae (diatoms and dinoflagellates) and cryptophytes
  • Transmission used to compensate the influence of substances which cause turbidity


 







Daph Tox II
BBE Daph Tox II

Product Features
 
  • Observes daphnids, commonly known as "water fleas", under the influence of constantly running sample water.
  • BBE Daph Tox II to detect hazardous compounds in water from rivers (source-water protection), plants, distribution systems and production drains to preserve human health and to monitor water.
  • Sample water (0.5 - 2 l/h) continuously runs through the measuring chamber containing the daphnia.
  • The live images obtained using a CCD-camera are evaluated online with an integrated PC to analyse changes in the behaviour of the daphnia.
  • If the change is statistically significant, an alarm is triggered.
  • The method of image analysis enables a series of measurement methods and plausibility tests to assess the daphnia's behaviour using different criteria.
  • Observation of speed parameters: average speed, speed distribution and distance between daphnia
  • Observation of behaviour: swimming height, location and fractal dimension (measurements
  • for turns and circling movements, curviness)
  • Observation of growth: determination of daphnia size

 

 







Fish Toximeter
BBE Fish Toximeter

Product Features
 
  • Observes the behaviour of fish in a tank under the influence of a stream of "sample" water with the aid of a camera and continuous computer-assisted image analysis
  • BBE Fish Toximeter to detect toxic substances in e.g. rivers, reservoirs, water supply systems, water treatment plant intakes and sewers.
  • Real-time, online early warning system.
  • Continuous analysis of live video images enables rapid determination of the behaviour and health of the fish.
  • Toxicity computations and assessments are based on the measurement of behavioural parameters: swim speed, behaviour (height, turns, circular motion, etc.), determination of size, number of active fish and location of fish in the aquarium.
  • Each type of change in behaviour of the fish is investigated and analysed.
  • The so-called "Toxic Index", summarised from all behavioural parameters, is calculated permanently.
  • If the toxic index exceeds a pre-determined value for a certain amount of time, an alarm is triggered.