Soil Drilling & Sampling

   
««First   «Prev   [1]  [2]  [3]  [4]  [5]  Next»  Last»»
Soil Sampling And Classification Set, Standard Set For Investigations Down To A Depth Of 2 Meter
Eijkelkamp 08.15 Soil Sampling And Classification Set, Standard Set For Investigations Down To A Depth Of 2 Meter

Product Features
 
  • Allow for in situ investigation.
  • Eijkelkamp 08.15 Soil Sampling And Classification Set, Standard Set For Investigations Down To A Depth Of 2 Meter suitable for investigations down to a depth of 2m. 
  • Consists of an Edelman auger (combination type), a gouge auger (inclusive of accessories), and a liner sampler (including soil sample containers).
  • Determination of soil pH by using a pH-indicator (range of pH 4 to 9, accurate to 0.5).
  • To determine the physical qualities of the soil a pocket interchange sieve set, a sand ruler, a portable electronic balance, a color identification book for soil, a pocket penetrometer and a pocket vane shear tester, an aplanatic magnifier and a pocket knife are included in the set.
  • For the determination of the groundwater level a sounding device with measuring tape has been included.
  • Various accessories including: a glass fibre utility probe (to check the substratum to avoid cutting through obstacles such as cables and tubes), aluminium soil sample boxes, a field data registration set, maintenance kit, work gloves and an aluminium transport case.

 







Civil Engineering Soil Test Kit
Eijkelkamp Civil Engineering Soil Test Kit

Product Features
 
  • Investigating the properties of a soil either takes place in situ, or in the laboratory with the aid of soil samples.
  • Eijkelkamp Civil Engineering Soil Test Kit complete set consists of an Edelman soil auger (combination type), a set of 5 stainless steel soil sample rings (with covers), a pocket penetrometer, a soil colour chart, a sand ruler, and hellige pH indicator.
  • The complete set is supplied with a carrying bag.






Sample Flasks And Aluminium Boxes
Eijkelkamp 99.08 Sample Flasks And Aluminium Boxes

Product Features
 
  • Eijkelkamp 99.08 Sample Flasks And Aluminium Boxes for storage and transportation of soil-, water- and plant samples.
  • Various means of storage can be obtained such as: aluminium boxes, plastic flasks, sample gutters and a variety of glass bottles.






Sampling Building Materials
Eijkelkamp 20.06 Sampling Building Materials

Product Features
 
  • Eijkelkamp 20.06 Sampling Building Materials set for sampling building materials.
  • The set consists of an auger set, measuring and sieving equipment and sampling shovels.
  • The synthetic measuring tape with a length of 50 m can be used for distance measurements.
  • The included lightweight, liquid-damped clinometer has an accuracy of 5 degrees on the top scale and 1 degree on the precisison scale. On the percent scale the clinometer has an accuracy of 1% from 0-70% and 2% from 70-150%.
  • A mirror compass is also included for position determination.
  • The included electronic balance has a capacity of 12000 g and an accuracy of 1 g and a dust and splashwater proof housing.
  • The included sampling shovels (with extra grip) are specifically suited to sample loose discharged materials (granulates).
  • The dimensions of the sampling shovels are resp. 12x12x12, 18x18x18 and 24x24x24 cm.

 

 

 

 







Soil Column Cylinder Auger
Eijkelkamp 05.07 Soil Column Cylinder Auger

Product Features
 
  • Developed to take undisturbed soil samples.
  • Allows for a fast insight in the built-up of the soil profile, the possibilities for a root system, etc.
  • The more insight in these matters, the more effective fertilization and treatment of the soil can be done.
  • To execute general examination of the soil profile.
  • Possible to take undisturbed samples with a length of 100 cm and a diameter of 93 mm, without digging a profile pit.
  • Eijkelkamp 05.07 Soil Column Cylinder Auger can be hammered into the soil by applying a gasoline driven mechanical hammer (on special request an electrical driven hammer).
  • The cylinder has a removable side, among other things, for checking and/or for sub-sampling of the soil column.
  • The standard set among other things, there are a gasoline driven mechanical hammer, a stainless steel soil column cylinder, a hand auger, an extraction system and sample gutters.






Lost Cone Drilling Set
Eijkelkamp 10.100 Lost Cone Drilling Set

Product Features
 
  • Standard set for drilling according to the lost-cone method.
  • Eijkelkamp 10.100 Lost Cone Drilling Set can be hammered into the soil using an electrical percussion hammer, which is placed on the casing.
  • Produce a very straight bore hole that is slightly wider in diameter than the casing in order to reduce the friction.
  • On reaching the desired depth a filter tube can be lowered through the casing or sensors can be left in the bore hole.
  • Subsequently the casing can be extracted using the 2-person operated rod puller in combination with the universal casing and rod pulling clamp.
  • Applied when placing monitoring well pipes with a small diameter, for environmental research.
  • The complete set contains: an electrical percussion hammer, an aggregate with insulation guard, striking pens, drive-cone holder for percussion casing, steel casing, pulling equipment, lost cones and various accessories. The standard set is equipped for drilling to a depth of up to 10 m.






Percussion Drilling Set For Heterogeneous Soils With RD32-Connection
Eijkelkamp 04.19.SC Percussion Drilling Set For Heterogeneous Soils With RD32-Connection

Product Features
 
  • Eijkelkamp 04.19.SC Percussion Drilling Set For Heterogeneous Soils With RD32-Connection for drilling up to a depth of 5 m.
  • Complete set contains: a gasoline driven percussion hammer, various extension rods, coupling sleeves, percussion gouges (combination type) in various diameters and lengths, a core sampler for PVC sample tubes and foil liners, a mechanical rod puller, an universal casing and rod puller clamp, a rod puller extension for the extraction of the first gouge, a crow bar, accessories to empty and clean the gouge, a lifting jack with lever and chain, an utility probe for safe cable finding, stairs for use with the percussion hammer in the field, etc., and aluminium  transport cases.
  • The RD32-connection is used in firmer, dryer soils.
  • The RD32-rods connect together by means of a coupling sleeve, which means that the massive extension rods have the same diameter along the entire length, which makes them very strong.

 







Surveying Set For Shallow Wells
Eijkelkamp 15.01.SA Surveying Set For Shallow Wells

Product Features
 
  • Eijkelkamp 15.01.SA Surveying Set For Shallow Wells is for site investigations (to find the best place for the construction of a well).
  • Survey drilling is started with the 10 cm auger. If the borehole collapses, which may happen below groundwater level, the casing tubes with steel screw thread sockets are lowered into the borehole and the drilling is continued through the casing tube by using the 7 cm augers or the percussion drill.
  • The standard set (with conical screw thread connection) include a tool guide, handle, extension rods, rod catchers, Riverside augers and augers for stony soils, a stone catcher, a pointed chisel, synthetic casing tubes with steel socket, a casing retriever, casing tube clamps, percussion drills, a set of tools, various accessories and steel transport boxes.






Water Well Drilling Set, Square 30 mm Connection
Eijkelkamp 15.02.SA Water Well Drilling Set, Square 30 mm Connection

Product Features
 
  • Eijkelkamp 15.02.SA Water Well Drilling Set, Square 30 mm Connection used for the construction of hand-drilled wells in soils without very hard layers and with sufficient aquifer recharge, permitting small diameter well. 
  • A maximum depth of approximately 20 m can be reached.
  • The maximum space for the filter is 108 mm diameter.
  • Where the soil becomes less cohesive, the casing tubes are used to prevent collapsing of the auger hole. When reaching sand below groundwater level the percussion drills 
    are used. When a layer of clay is reached again, bailing is stopped and drilling is continued inside the casing. If necessary, a tripod with winch may be used.
  • The standard set (with square 30 mm connection) is equipped with a tool guide, crosspiece and kelly, handles, various extension rods, rod catchers with cleaning point, Riverside augers, an elongation piece for Riverside and bucket auger, chisel auger, stony soil augers, stone catcher and pointed chisel, percussion drill, synthetic casing tubes with steel screw thread sockets, casing retriever, a notched casing shoe, casing head, casing clamps, a sounding device with tape to measure the groundwater level, a shovel and pick-axe, various accessories and steel transport boxes.






Water Well Drilling Set, Square 40 mm Connection
Eijkelkamp 15.05 Water Well Drilling Set, Square 40 mm Connection

Product Features
 
  • Eijkelkamp 15.05 Water Well Drilling Set, Square 40 mm Connection used for the construction of hand-drilled wells in harder soils with sufficient aquifer recharge, permitting small diameter wells.
  • The maximum space for the filter is 140 mm diameter.
  • The standard set (with square 40 mm connection) is equipped with a tool guide, crosspiece and kelly, handles, various extention rods, rod catchers with cleaning point, Riverside augers with side flap for unloading, chisel augers, flight augers, a stone catcher and pointed chisel, synthetic casing tubes with steel screw thread sockets, pulling cap for casing, a notched casing shoe, a casing head, casing retriever for lost casing tubes, a casing tube clamp, bailers, a sounding device with tape to measure the groundwater level, a shovel and pickaxe, various accessories and steel transport boxes.