Soil Water Sampler (Lysimeter)

   
««First   «Prev   [1]  [2]  [3]  [4]  Next»  Last»»
Remote Soil Water Sampler
Soil Moisture Remote Soil Water Sampler

Product Features
 
  • Soil Moisture Remote Soil Water Sampler designed for continuous soil solution collection from remote sites where minimum disturbance to the soil surface is desired.
  • Can be installed at depths ranging from 6 inches to 10 feet, with the collection vessel situated in a site adjacent to the study plot.
  • The porous ceramic has high-flow characteristics, high alumina content for low adsorption, and moderate bubbling pressure (1 bar or 100 kPa).
  • The Butyrate body terminates with a ?swedge-lock? compression fitting for connection to tubing that is routed to a remote collection vessel.
  • The sampler has two nylon fittings: one for 1/4" O.D. tubing and one for 1/8" O.D. tubing.
  • The 1000 ml Extraction Kit is recommended, and a continuous vacuum source is required for operation of the Sampler.






Slim Remote Soil Water Sampler
Soil Moisture Slim Remote Soil Water Sampler

Product Features
 
  • Soil Moisture Slim Remote Soil Water Sampler 1 Bar High Flow Cup






Well Head Lysimeter Station
Soil Moisture Well Head Lysimeter Station

Product Features
 
  • Soil Moisture Well Head Lysimeter Station to be used with the lysimeters. 
  • The lysimeter well head has a built-in vacuum gauge (0-100 cbar) that will give user information about the vacuum inside your lysimeter.
  • Two, easy to operate valves, for pressurizing or pulling a vacuum to the system and collecting the sample are in place. 
  • This very practical well head station is made of strong HDPE has a liquid tight cover and is lockable with a hexgonal bolt.
  • It has a load capacity of max. 350 kgs. 
  • Easy installation and a clean work place for sampling is now available with the 1919 lysimeter well head station.






Press/Vac. Soil Water Sampler
Soil Moisture Press/Vac. Soil Water Sampler

Product Features
 
  • Consists of a PVC body with a ceramic cup epoxy bonded to one end.
  • The porous ceramic cup has an outside diameter of 1.9" (4.8 cm) and is 2.0" (5.0 cm) in length.
  • Soil Moisture Press/Vac. Soil Water Sampler supplied with a 2 bar (200 kPa) ceramic cup, but 0.5 bar (50 kPa) and 1 bar (100 kPa) cups are also available.
  • Nylon compression fittings are threaded into the top cap and are used to attach lengths of Polyethylene tubing to a remote sampling station.
  • A pressure-vacuum hand pump is used for evacuating the sampler and recovering the sample.

 







Ultra Soil Water Sampler
Soil Moisture Ultra Soil Water Sampler

Product Features
 
  • Soil Moisture Ultra Soil Water Sampler used where samples are collected to detect concentrations of organic or inorganic solutes or pesticides, with sensitivities in parts per billion.
  • Made entirely of 1 bar high-flow ceramic and uses a combination ceramic and glaze plug.
  • The ceramic material has high-flow characteristics, high alumina content for very low adsorption characteristics, and moderate bubbling pressure (1 bar or 100 kPa).
  • The lower 1/3 of the cup is glazed on the inside to retain the collected sample.
  • Teflon compression fittings are threaded into the top plug, which permit the use of 1/8" diameter Teflon tubing for the cleanest sample extraction available.
  • This sampler has an outside diameter of 1.9" (4.8 cm) and a 10" (25.4 cm) overall length.
  • Available in 80ml and 530ml sample. 






Hi-Pressure / Vacuum Soil Water Sampler
Soil Moisture Hi-Pressure / Vacuum Soil Water Sampler

Product Features
 
  • Soil Moisture Hi-Pressure / Vacuum Soil Water Sampler used for deep sampling down to 300 foot (100 m) depths, or where long lateral runs are required.
  • Consists of a 2 bar (200 kPa) ceramic cup, PVC body, and an end cap.
  • High-pressure compression fittings allow connection of polyethylene vacuum and pressure tubing.
  • The sampler is 1.9" (4.8 cm) in diameter and 24" (60 cm) long.
  • Thick-wall PVC tubing and internal check valves allow for safe, high-pressure use, without risk of damage or sample loss.
  • Insatallation depth up to 300ft. 






Slim Tube Hi Pressure / Vacuum Soil Water Sampler
Soil Moisture Slim Tube Hi Pressure / Vacuum Soil Water Sampler

Product Features
 
  • Soil Moisture Slim Tube Hi Pressure / Vacuum Soil Water Sampler used for deep sampling down to 300 foot (100m) depths, or where long lateral runs are required.
  • Consists of a 1 bar high flow (100 kPa) ceramic cup, PVC body, and an end cap.
  • High-pressure compression fittings allow connection of polyethylene vacuum and pressure tubing.
  • The sampler is 1.3" (3.3 cm) in diameter and 24" (60 cm) long.
  • Thick-wall PVC tubing and internal check valves allow for safe, high-pressure use, without risk of damage or sample loss.






Soil Water Sampling Plate
Soil Moisture Soil Water Sampling Plate

Product Features
 
  • Soil Moisture Soil Water Sampling Plate designed to be buried beneath in situ or laboratory soil columns to collect drainage.
  • A continuous vacuum must be applied to collect samples held at soil suctions greater than field capacity.
  • The sampling plate is 10.5" (27 cm) in diameter, with Butyl rubber backing and a stainless steel outflow stem on the bottom side.
  • The bubbling pressure of the porous ceramic plate is in excess of 0.5 bar (50 kPa) and has high-flow characteristics.






Pan Lysimeter
Soil Moisture Pan Lysimeter

Product Features
 
  • Soil Moisture Vacuum Hand Pump perfect device for taking samples in conditions of soil saturation and subsequent drainage conditions.
  • Placed near surface or at some depth it provides a good way to collect soluble agrochemical surface residue, near surface salt accumulations (created over the dry season), or in gaining a better understanding of the infiltration properties of a particular soil type under high flow conditions.
  • Top screen allows for placement of cover crop, etc. over the collection bucket.
  • Easy access provided by "flush & sample removal" access tubes to the surface.
  • Requires minimum maintenance after installation.






Vacuum Hand Pump
Soil Moisture Vacuum Hand Pump

Product Features
 
  • Easy hand operated vacuum pump for extracting solution samples from Soil Water Samplers using an extraction kit.
  • Includes a vacuum dial gauge.
  • Capable of developing vacuums to 800kPa.
  • Soil Moisture Vacuum Hand Pump rugged portable design for prolonged use in the field
  • Field repairable valves and pump pads
  • Pressures to +50 PSI, vacuums to .8 bars suction
  • All parts brass, stainless steel or rugged plastics for long service