Soil Drilling & Sampling

   
««First   «Prev   [1]  [2]  [3]  [4]  [5]  Next»  Last»»
Bi-Partite Gouge Augers
Eijkelkamp 04.02 Bi-Partite Gouge Augers

Product Features
 
  • Can be extended by coupling an extension rod.
  • Samplings can be carried out in a very short time and at greater depths.
  • Eijkelkamp 04.02 Bi-Partite Gouge Augers available in three standards sets:
  • One set with a bayonet connection (SA) and gouge augers with various lengths and diameters, extension accessories and a strong carrying bag for transport in the field.
  • A greater profile survey because of the relatively longer operational part.
  • A greater soil depth for each stroke results in the swifter reaching of greater depths.
  • The samples obtained are virtually undisturbed.






Gauge Auger Model P
Eijkelkamp 04.03 Gouge Auger Model P

Product Features
 
  • Eijkelkamp 04.03 Gouge Auger Model P cylindrical tapered cutting head at the bottom side of the gouge such that, when the auger is pushed into the soil, cuts a cylinder shaped piece from the soil.
  • Does not need to be revolved around its axis after being inserted.
  • The tapered cutting head holds the sample better.
  • Suitable for soil mapping because of its small diameter and the cylindrical cutting head. 






Gouge Auger Set For Top Layers
Eijkelkamp 04.06 Gouge Auger Set For Top Layers

Product Features
 
  • Two gouge augers have been included for sampling top layers.
  • The 25cm arable land auger is used to take samples from the furrow.
  • The mineral auger is used to take top layer samples up to a depth of  60 cm.
  • Eijkelkamp 04.06 Gouge Auger Set For Top Layers suitable for sampling the top layers of arable land, in particular for a nitrate or a fertilization research, etc.






Soil Sampler, Core Type
Soil Moisture Soil Sampler, Core Type

Product Features
 
  • Soil Moisture Soil Sampler, Core Type allows the extraction of intact soil cores.
  • "undisturbed" type soil sampler.
  • A core 2-1/4" (5.7 cm) in diameter is extracted and held in a brass cylinder.
  • The cylinder and soil sample can then be placed in a pressure plate extractor or Tempe cell apparatus, and the water-holding characteristics of the sample can be determined.
  • The cylinder can be used to provide a sample of known volume, allowing the bulk density to be determined.
  • The sampler is supplied with two wedge coring tips, driving hammer, core extractor, spanner and strap wrench for replacing coring tips, six cylinder caps, and five brass cylinders; one 6 cm long, two 3 cm long, and two 1 cm long.






Soil Sampler, Core Type
Soil Moisture Soil Sampler, Core Type

Product Features
 
  • Soil Moisture Soil Sampler, Core Type allows the extraction of intact soil cores.
  • A core 3-1/2" (8.9 cm) in diameter is extracted and held in a brass cylinder.
  • The cylinder and the soil sample can then be placed in a pressure plate extractor or Tempe cell apparatus and the water-holding characteristics of the sample can be determined.
  • The cylinder can be used to provide a sample of known volume, allowing the bulk density to be determined.
  • The sampler is supplied with two wedge coring tip, hammer, spanner wrench for replacing coring tips, and six brass cylinders; two 6 cm long and four 3 cm long.






Puller Jack Set
Soil Moisture Puller Jack Set

Product Features
 
  • Eijkelkamp  Puller Jack Set is rugged and simple device to remove Soil Sampling Tubes after inserting into the soil.
  • The lever arm action allows for easy extraction of soil tube hammered into the soil.
  • More convienent and faster extraction provided by the Puller Jack than Drop Hammer extraction methods.
  • Comes complete with stand and jaws.






Single Gouge Augers
Eijkelkamp 04.01 Single Gouge Augers

Product Features
 
  • Eijkelkamp  04.01 Single Gouge Augers cannot be extended and are supplied in various lengths and diameters.
  • Available in three standard sets:
  • A set for sampling more or less soft soil layers (SA) with two gouge augers having different lengths but the same diameter, packed in a strong carrying bag.
  • A greater soil depth for each stroke results in the swifter reaching of greater depths.
  • The samples obtained are virtually undisturbed.

 







Eijkelkamp Batch Sampler

Product Features
 
  • Sampling during batch inspection and sand dredging.
  • Enables sampling of loose discharged sand, dry coarse sand and fine gravel.
  • Sampling according to imaginary grid.
  • Has a large mouth enabling to sample even more coarse materials. 
  • Two designs were available: the riverside and the soft clay auger.
  • Eijkelkamp Batch Sampler special set is composed of an ergonomic handle, the batch sampler, a gouge auger Ø 60 mm, a soft clay auger, Riverside auger Ø 100 mm and a wire mesh sieve 16 mm.
  • According to Dutch protocol BRL SIKB 1000.

 







 Grass Plot Sampler
Eijkelkamp 05.03 Grass Plot Sampler

Product Features
 
  • Eijkelkamp 05.03  Grass Plot Sampler available in two dimensions, small or large.
  • Consist of a steel auger pipe, a collecting bucket and a stick with a steel handle. Sample is easily pushed toward the collecting trough because of the conical shape of pipe.
  • The correct number of samples per hectare depends on the type of crop, the relief and the type of soil.
  • Required to take 30 samples per hectare in case of grassland.
  • Possible to take samples of the top 5 cm (resp. 10 cm) of grass covered areas, for root- and/or fertilization research, quickly.
  • Suitable for research in grassland farming, horticulture and for the Parks and Public Gardens Department.

 







02.01 Tripods
Eijkelkamp 02.01 Tripods

Product Features

 

  • Eijkelkamp 02.01 Tripods is an essential part of a bailer boring set (cable tool drilling equipment). Also drillings at greater depths, or the application of heavier augering or soil core sample equipment require the use of a tripod.
  • In selecting a tripod, working height, weight, and maximum load capacity (= tensile force) are usually determinant factors. However, the range of application is of such a magnitude, that the selection of the tripod depends strongly on the kind of work that may have to be performed with the selected tripod besides the performance of soil drillings.