Soil Chemical Content Analysis

   
««First   «Prev   [1]  [2]  [3]  [4]  
Soil K+ Kit w/30 Samples
Spectrum Soil K+ Kit w/30 Samples

Product Features
 
  • Spectrum Soil K+ Kit w/30 Samples for use with Cardy Potassium K+ Meter






Soil Na+ Kit W/30 Samples
Spectrum Soil Na+ Kit W/30 Samples

Product Features
 
  • Spectrum Soil Na+ Kit W/30 Samples for use with Cardy Potassium Na+ Meter 

 







Soil Temperature
Skye Soil Temperature

Product Features
 
  • An inexpensive solution to recording soil temperature at different depths. 
  • The sensing element is located at the tip and the cable length adapted accordingly. 
  • Skye Soil Temperature fully waterproof.






Soil Salinity Sensor
Soil Moisture Soil Salinity Sensor

Product Features
 
  • Comes calibrated, with 4' long lead
  • Soil Moisture Soil Salinity Sensor consists of a pair of electrodes embedded in a fine-textured porous ceramic element.
  • The water saturating the ceramic element remains in chemical equilibrium with the soil.
  • The sensor is spring-loaded to ensure good hydraulic contact between the sensor and the soil.






Salinity Bridge
Soil Moisture Salinity Bridge

Product Features
 
  • Soil Moisture Salinity Bridge provides a means of measuring salinity values in the soil solution without continuous disturbance to the soil profile.
  • The efficiency of measurement, both in the field and in laboratory setups, makes it possible to substantially increase the pace of scientific investigation and to observe dynamic changes in salinity values.
  • Reads out directly in mmho/cm corrected to 25 C.
  • Provides measurement of conductivity in the range of 2-40 mmho/cm.
  • Battery powered






HFP01SC-L Hukseflux Self-Calibrating Soil Heat Flux Plate
Campbell Scientific HFP01SC-L Hukseflux Self-Calibrating Soil Heat Flux Plate

Product Features
 
  • Campbell Scientific HFP01SC-L Hukseflux Self-Calibrating Soil Heat Flux Plate typically used in Bowen ratio and energy balance systems
  • Voltage output proportional to local heat flux
  • On-board heater allows calibration via the "Van den Bos-Hoeksema" method
  • Calibration takes 8 minutes; typically performed every three hours
  • Minimum of two soil heat flux measurements are recommended for a homogeneous site
  • Manufactured by Hukseflux






CN3 Heat Flux Plate
Campbell Scientific CN3 Heat Flux Plate

Product Features
 
  • Stainless steel exterior with phenolic core.
  • Low heat capacity for rapid response.
  • Campbell Scientific CN3 Heat Flux Plate easy correction for sensor to medium conductivity miss-match.
  • Differential thermopile sensor.
  • Manufactured by Middleton Solar.

 







FieldScout pH 600 & 400 Meters

Product Features

 Modern User Interface

  • The new FieldScout pH 400 & 600 Meters have a modern, intuitive, and user friendly interface that allows users to quickly access the meters advanced features and settings
  • Temperature and pH data remain visible, so monitoring does not stop when settings are changed or options are selected
  • Large, backlit 3.2” LCD color display ensures measurement values and menu options are easy to read

 
Rugged and Ergonomic Design

  • The FieldScout pH 400 & 600 Meters have both been designed for professional use
  • Protected against dust and splashing – IP65
  • Meters are fitted with a rubber boot to help absorb shock
  • The USB port is well protected by a tightly sealed cover. The casing and battery door are fitted with rubber seals.
  • 1 year warranty

pH 400 Meter

  • Professional grade quality
  • Large, 3.2” LCD color display allows easy measurement reading
  • Intelligent calibration wizard simplifies the calibration process
  • Supports 1- and 2-point calibration
  • Light weight and compact design make it highly suitable for field use and handheld applications
  • Powered by 3 rechargeable AA-batteries (AC adapter included)
  • Meter includes case with cavity for sensor, batteries, and pH 4 and 7 standards. Excludes pH probe, please order separately

pH 600 Meter

Includes all features of the FieldScout pH 400 Meter, plus...

  • Better resolution - 0.005
  • Internal storage of measured data points (500 max.)
  • Stored and logged data points can be transferred to a PC through the USB port (65,000 max.)
  • Ability to query both momentary pH value and temperature
  • Supports up to 5-point calibration
  • Alarm set points and warnings for pH and temperature
  • Meter includes case with cavity for sensor, batteries, and pH 4 and 7 standards. Excludes pH probe, please order separately

 

ISFET (Ion Sensitive Field Effect Transistor) Probes!
Glass Free and Durable Probe - 2 Options to Fit Your Needs

  • Unlike glass electrodes, the FieldScout 400 and 600 pH Meters feature ISFET pH electrodes that will not shatter.  Additionally, neither model requires wet storage
  • Both come with a 6-month warranty
  • Spectrum ISFET probes are made of high quality materials such as PEEK, ABS, and PVC
  • Sample directly in plug trays, pots, containers, solutions, ground soils, and soilless media