Water Quality Testing

   
««First   «Prev   [1]  [2]  [3]  [4]  [5]  [6]  [7]  [8]  Next»  Last»»
TPS smartCHEM-D
TPS smartCHEM-D

Product Features
 
  • Dissolved Oxygen meter
  • Readings can be recorded manually, or automatically logged at preset intervals
  • Capabilities of the smartCHEM-D have been expanded with the RS232 port
  • Can also be used during Manual and Automatic Datalogging
  • Fully waterproof
  • TPS smartCHEM-D automatically detects whether the sensor is in a Zero DO2 solution or in air and calibrates itself accordingly.






TPS proCHEM-I
TPS proCHEM-I

Product Features
 
  • TPS proCHEM-I provide an economical answer to most process monitoring, control or recording requirements.
  • Dual Set Points are provided
  • Separate LED's indicate when either of the Set Points has been exceeded
  • Easy to install.
  • Non corrosive, waterproof and dustproof
  • Designed for maximum  flexibility.
  • 4 to 20 mA and 0 to 1 V DC outputs are provided as standard.






TPS proCHEM-D
TPS proCHEM-D

Product Features
 
  • Enclosure Waterproof to IP65
  • Dual Set Point Control Relays
  • TPS proCHEM-D easy to Install
  • Easy to Use
  • 4-20mA and 0-1 V DC Outputs
  • Australian Made






TPS proCHEM-DI
TPS proCHEM-DI

Product Features
 
  • Simple, reliable process and control instrumentation.
  • TPS proCHEM-DI is a breeze to operate
  • It is desirable that the Dryer does not remove too much of the moisture (or if it does, that the correct moisture level be reestablished with sprays)
  • Sugar dryness is measured in terms of a Dilution Indicator (DI), which increases with moisture content. Typical values lie between 30 and 50 %  
  • Has an adjustable LOWER LIMIT setting
  • Can be wall-mounted with 3 screws.






TPS easyCHEM 770
TPS easyCHEM 770

Product Features
 
  • Automatic controller for ORP in Swimming Pools and Spa Pools. The easyCHEM 770 has 2 inbuilt peristaltic pumps, making installation a breeze.
  • Water resistant to IP25.
  • Supplied with sensors, calibration standards and all accessories required for installation and operation.
  • Fast and easy to install.
  • Easy to use.
  • Designed for domestic and small commercial pool installations.






TPS easyCHEM 660
TPS easyCHEM 660-CO2

Product Features
 
  • Automatic controller for ORP and pH in swimming and spa pools. 
  • TPS easyCHEM-660 CO2 has 1 inbuilt peristaltic pump and 1 mains power Control Output, making installation a breeze.
  • Supplied with sensors, calibration standards and all accessories required for installation and operation.
  • Fast and easy to install.
  •  Water resistant to IP25.
  • Easy to use
  • Designed for domestic and small commercial pool installations.
  • To see how quick and easy the easyCHEM 660 is to install, ask for a copy of the installation guide.






TPS Aqua-TP
TPS Aqua-TP

Product Features
 
  • Dual readout of Salinity or TDS plus pH or ORP
  • TPS Aqua-TP easy to use
  • One-touch calibration
  • Waterproof to IP65
  • Full-text prompting and error messages
  • Large digit mode
  • Fold-out stand for bench use
  • Australian Made






TPS easyCHEM 330
TPS easyCHEM 330

Product Features
 
  • Automatic controller for ORP or Acid in Swimming Pools
  • TPS easyCHEM 330 has a mains power Control Output socket, making installation a breeze. This can be used to power a pump, solenoid, CO2 valve, Salt Chlorinator etc.
  • Supplied with sensors, calibration standards and all accessories required for installation and operation
  • Shutoff Alarmwhen dosing pump has run too long continuously.
  • Fast and easy to install
  • Water resistant to IP25
  • Easy to use






TPS easyCHEM 550
TPS easyCHEM 550

Product Features
 
  • TPS easyCHEM 550 automatic controller for ORP in Swimming Pools and Spa Pools.
  • Acid Feeder adds the same amount of acid each day, even if the pool pump is run for longer or shorter times.
  • Digital timer output for pool pump, with automatic adjustment for Summer and Winter cycles.
  • Shutoff Alarm when Chlorine pump has run too long continuously. Stops an entire drum of Chlorine being dosed in case of an instrument or probe fault.
  • Data Alarm in case ORP reading goes outside normal levels. Safeguards against over or underdosing Chlorine
  • Super-chlorinate function.
  • Filter backwash and pump to waste assist.






TPS easyCHEM 330-CO2
TPS easyCHEM 330-CO2

Product Features
 
  • Automatic controller for ORP or Acid in Swimming Pools
  • TPS easyCHEM 330-CO2 has a mains power Control Output socket, making installation a breeze. This can be used to power a pump, solenoid, CO2 valve, Salt Chlorinator etc.
  • Supplied with sensors, calibration standards and all accessories required for installation and operation
  • Shutoff Alarmwhen dosing pump has run too long continuously.
  • Fast and easy to install
  • Water resistant to IP25
  • Easy to use