Data Logger

   
««First   «Prev   [1]  [2]  [3]  [4]  [5]  [6]  [7]  Next»  Last»»
Niwa Sealed Logger Enclosure - NIWA UNISLBO

Product Features
 
  • Niwa Sealed Logger Enclosure - NIWA UNISLBO suitable for housing Unidata Starloggers to give added protection.
  • It has NIWA-standard external connectors.
  • NIWA, and many other organizations use this sealed enclosure when deploying Unidata Starloggers. 
  • We recommend it as a simple and effective way to provide protection and a robust standard connection interface.   






Starlogger - Unidata 6004D-2
Niwa Starlogger - Unidata 6004D-2

Product Features
 
  • Easy to program using standard Starlog software.
  • Niwa Starlogger - Unidata 6004D-2 suitable for standalone or telemetered applications and has an SDI-12 serial data bus.
  • Designed for a wide range of applications, the Starlogger is a high performance, upward compatible replacement for the original Starlog portable data logger.
  • Easy to program and offers wide signal capacity and range.
  • It provides the user with a display and keypad for communicating with the logger.
  • Eight (10-bit) analogue channels, four (16-bit) counter/frequency channels and two (16-bit) high speed serial I/O lines (each with eight channels), an SDI-12 interface and 512kB memory. 
  • Provides two outputs to power external instruments. Scan rates range from 125 milliseconds to 5 minutes.
  • The Starlogger uses RS-232 serial communications to communicate with a computer, or a radio/cellular modem for a telemetry application.
  • Starloggers are completely portable and contain an internal battery supply good for one year of normal operation. Starloggers are programmed using standard Starlog software.






CR200X Data Logger
CR200X Data Logger

Product Features
 
  • CR200X Data Logger ideal where only a few sensors will be measured
  • Stores 128,000 data points (non-volatile)
  • 6 Kbyte program storage (non-volatile)
  • Data format is table-based
  • Available operating systems: PakBus®
  • Software support offered in SCWin 2.0, PC400, or LoggerNet 3.x

 







CR216X Datalogger with 2.4-GHz Spread-Spectrum Radio, Extended Memory
CR216X Datalogger with 2.4-GHz Spread-Spectrum Radio, Extended Memory

Product Features
 
  • CR216X Datalogger with 2.4-GHz Spread-Spectrum Radio, Extended Memory ideal datalogger to measure a few sensors and transmit data using a built-in 2.4-GHz spread spectrum radio
  • Stores 128,000 data points (non-volatile).
  • 6-KB program storage (non-volatile)
  • Data format is table-based.
  • Available operating systems: PakBus®
  • Software support offered in SCWin 2.0, PC400, or LoggerNet 3.x






CR800 Data Logger Rugged & Reliable Data Loggers
CR800 Data Logger Rugged & Reliable Data Loggers

Product Features
 
  • CR800 Data Logger Rugged & Reliable Data Loggers provides a lower-cost datalogger alternative for measurements of a limited number of sensors, yet can be used with most of our telecommunication devices such as cellular telephones, UHF/VHF RF modems, and satellite transceivers.
  • Uses external power supplies and keyboard displays.






CR850 Measurement and Control Datalogger with Keyboard
CR850 Measurement and Control Datalogger with Keyboard

Product Features
 
  • CR850 Measurement and Control Datalogger with Keyboard ideal datalogger where only a few sensors will be measured
  • Stores 4 Mbytes of data and programming in SRAM
  • Includes an on-board keyboard display as part of its integrated package
  • Data format is table
  • Operating system: PakBus®
  • Software support offered in LoggerNet or PC400 (full-featured) or ShortCut (programming)
  • Supports Modbus protocol, SDI-12 protocol, and SDM devices

 







CR3000 Data Logger
CR3000 Data Logger

Product Features
 
  • Compact, self-contained data logger
  • CR3000 Data Logger integrated keyboard and display
  • 2M Flash for operating system
  • 4M battery-backed SRAM for CPU use, program storage, and data storage
  • Data format: table
  • Available operating systems: PakBus®
  • Software support: requires LoggerNet 3.2 or higher (not included)

 







CR700X Measurement and Control System
CR700X Measurement and Control System

Product Features
 
  • CR700X Measurement and Control System suited for applications that require high resolution (e.g., thermocouples) or a large number of input channels
  • Up to seven I/O Cards (CR7 720) or fourteen I/O Cards (CR7 720XL) can be inserted to configure a system for specific applications
  • Stores 280,000 data points
  • Modular design consists of:
  • Control module (CR7 700X)
  • Input/output module (CR7 720 or CR7 720XL)
  • Field or laboratory enclosure (ENC 7F, ENC 7XL, or ENC 7L)
  • 24 kbyte ROM, 40 kbyte RAM
  • Data format is mixed array
  • Software support offered in LoggerNet (full-featured) or Short Cut (programming)

 







CR720 I/O Module for CR7
CR720 I/O Module for CR7

Product Features
 
  • Performs 16-bit A/D-D/A conversion
  • CR720 I/O Module for CR7 provides regulated power for analog and digital functions
  • Contains slot for up to seven I/O Cards
  • Housed in either the ENC 7F enclosure or ENC 7L enclosure.

 







CR720XL Large I/O Module for CR7
CR720XL Large I/O Module for CR7

Product Features
 
  • CR720XL Large I/O Module for CR7 provides regulated power for analog and digital functions
  • Performs 16-bit A/D-D/A conversions
  • Contains slots for up to fourteen I/O Cards
  • Housed in the ENC 7X