Communications

   
««First   «Prev   [1]  [2]  [3]  [4]  [5]  [6]  Next»  Last»»
CR1000KD Keyboard/Display for the CR1000
CR1000KD Keyboard/Display for the CR1000

Product Features
 
  • Keyboard/Display for the CR1000 data logger
  • CR1000KD Keyboard/Display for the CR1000 not compatible with other Campbell Scientific data loggers
  • Displays 8 lines x 21 characters
  • 16-character keyboard
  • Supports the use of custom menus






NL120 Ethernet Module
NL120 Ethernet Module

Product Features
 
  • NL120 Ethernet Module smallest Ethernet Module available for our CR1000 and CR3000 data loggers
  • Connects directly to the 40-pin peripheral port on a CR1000 or CR3000 data logger
  • Communicates over a local area network or dedicated Internet connection via TCP/IP






NL115 Ethernet Interface And CompactFlash® Module
NL115 Ethernet Interface And CompactFlash® Module

Product Features
 
  • NL115 Ethernet Interface And CompactFlash® Module combines the functionality of our NL100 Network Link Interface and CFM100 CompactFlash Module
  • Connects to either our CR1000 or CR3000 data logger via the 40-pin peripheral port
  • Allows communications over local networks via TCP/IP
  • Stores data on a removable CompactFlash card
  • Can handle card capacity up to 2 GB
  • Uses DevConfig to setup






NL100 Network Link Interface
NL100 Network Link Interface

Product Features
 
  • NL100 Network Link Interface communicates via a local area network or dedicated internal connections
  • 10baseT Ethernet peripheral that communicates via TCP/IP
  • Supported by LoggerNet (2.0) and PC208W (3.2) or higher
  • Uses data logger RS-232 or CS I/O port to communicate with a computer

 







MD485 RS-485 Multidrop Interface
MD485 RS-485 Multidrop Interface

Product Features
 
  • Connects to RS-485 networks
  • MD485 RS-485 Multidrop Interface provides three interface ports: RS-485, RS-232, CS I/O
  • Uses twisted pair cable between RS-485 links
  • Supports a 4000 foot maximum cable run in a network
  • Can be configured to handle multiple RS-485 protocols and all CSI communication modes
  • Not compatible with MD9 networks
  • Extended temperature testing optional

 







RF401 900 MHz Spread Spectrum Radio
RF401 900 MHz Spread Spectrum Radio

Product Features
 
  • Replaces our RF400 Spread Spectrum Radio
  • Rugged, low-cost transceivers
  • 100 mW, 910 to 918 MHz frequency
  • Frequency-hops over 25 channels
  • An individual FCC license not required
  • RF401 900 MHz Spread Spectrum Radio can be used in the field as a transceiver or in the office as the base station
  • Power provided by data logger, PS100/A100 combination, or CH100/12Vdc battery, depending upon application
  • Transmits up to one mile with omni-directional antenna; up to 10 miles with higher gain directional antennas
  • Designed for use in Pak-Bus networks
  • Settings stored in non-volatile memory
  • Optional extended temperature testing

 







RF411 922-MHz Spread-Spectrum Radio with CS I/O Port
RF411 922-MHz Spread-Spectrum Radio with CS I/O Port

Product Features
 
  • Replaces the RF410 spread-spectrum radio
  • Rugged, low-cost transceivers
  • 100 mW, 920 to 928 MHz frequency
  • Frequency-hops over 25 channels
  • Does not require an individual FCC license
  • RF411 922-MHz Spread-Spectrum Radio with CS I/O Port can be used in the field as a transceiver or in the office as the base station
  • Current drain can be as low as 1 mA
  • Transmits up to one mile with omnidirectional antenna; up to ten miles with higher gain directional antennas
  • Settings stored in non-volatile memory
  • Optional extended temperature testing

 







RF416 2.4-GHz Spread-Spectrum Radio with CS I/O Port
RF416 2.4-GHz Spread-Spectrum Radio with CS I/O Port

Product Features
 
  • Replaces the RF415 spread-spectrum radio.
  • Rugged, low-cost transceivers
  • 60 mW, 2.45- to 2.46-GHz frequency
  • Frequency-hops over 25 channels.
  • Does not require an individual FCC license.
  • RF416 2.4-GHz Spread-Spectrum Radio with CS I/O Port can be used in the field as a transceiver or in the office as the base station.
  • Current drain can be as low as 1 mA (stand by).
  • Transmits up to one mile with omnidirectional antenna; up to ten miles with higher gain directional antennas.
  • Settings are stored in non-volatile memory.






MAX RF Maxon VHF/UHF Radio
MAX RF Maxon VHF/UHF Radio

Product Features
 
  • Option of the following frequency ranges - 148 to 174 MHz/440 to 470 MHz/400 to 430 MHz
  • MAX RF Maxon VHF/UHF Radio meets NTIA narrowband and FCC refarming requirements for transmission
  • Supports up to 16 channels
  • Transmits up to 25 miles line of sight

 







RF400 900 MHz Spread Spectrum Radio/Modem
RF400 900 MHz Spread Spectrum Radio/Modem

Product Features
 
  • Rugged, low-cost transceivers
  • 100 mW, 910 to 918 MHz frequency
  • Frequency-hops over 25 channels
  • An individual FCC license not required
  • RF400 900 MHz Spread Spectrum Radio/Modem can be used in the field as a transceiver or in the office as the base station
  • Current drain can be as low as 1 mA
  • Transmits up to one mile with omni-directional antenna; up to 10 miles with higher gain directional antennas
  • Settings stored in non-volatile memory
  • Optional extended temperature testing