Ground Water Sampling & Monitoring

   
««First   «Prev   [1]  [2]  [3]  [4]  [5]  
Monitoring Well Skimmer
Eijkelkamp Monitoring Well Skimmer

Product Features
 
  • Eijkelkamp Monitoring Well Skimmer is a system designed to actively recover free floating hydrocarbon (LNAPL) from groundwater.
  • It consists of a combination of floating intakes of hydrophobic intake screens.
  • Viscosities up to 1000 Centistokes
  • Relative densities from 0.7- 0.96
  • Recovery rates up to 200 l/hour
  • Hydrophobic filter
  • Relative density intake
  • Will fit in 50 mm well
  • Handles viscosities 1-1000 Centistokes
  • Can reduce product down to <0.25 mm
  • Flow rates up to 3000 litres per day
  • Minimum maintenance
  • Easy to use






Liquid Layer Sampler, Rod-Operated
Eijkelkamp 12.40 Liquid Layer Sampler, Rod-Operated

Product Features
 
  • Eijkelkamp 12.40 Liquid Layer Sampler, Rod-Operated suitable for the indication of layers, measuring the thickness of the floating layer and the sampling of drums, tanks on lorries, gully holes and shallow oil separators.
  • With the liquid layer sampler also depth specific samples can be taken.
  • The translucent sample tube allows for immediate research in the field of for instance the thickness of the layers in the sample.
  • The sample taken can be safely transported in the sample tube which is placed in the liquid proof transport tube.
  • Applying the silicone piston provided it is also possible to sample thicker, viscous fluids or even a sludge layer while maintaining the thickness of the layers.
  • The set contains teflon sample tubes of different lengths, operating rods with knob and adjustable piston, transport tubes, top- and bottom stops and a sturdy carrying bag.






Liquid Layer Sampler, Cable-Operated
Eijkelkamp Liquid Layer Sampler, Cable-Operated

Product Features
 
  • Eijkelkamp Liquid Layer Sampler, Cable-Operated suitable for sampling and accurately making visible the layers in deeper containers, basins, monitoring wells with a diameter exceeding 38 mm, etc.
  • The sample can be transported without disturbance in the transport tube.
  • The cable-operated liquid layer sampler can not be used in thick, viscous fluids.
  • After sampling, the thickness of the sludge- and floating layers can be measured, as, in the translucent tube, these are visible in the origial position and thickness.
  • The teflon tube can be cleaned easily and effectively.
  • The standard set contains: teflon sample tubes, operating rod with clip, drop weight, teflon control cable, top- and bottom stops, transport tubes and a sturdy carrying bag.






Teflon Plunging Siphons
Eijkelkamp 12.18 Teflon Plunging Siphons

Product Features
 
  • Eijkelkamp 12.18 Teflon Plunging Siphons is a very simple instrument for sampling of homogeneous fluids from vessels, tanks, containers (for instance tank lorries) and basins.
  • As glass plunging siphons tend to break easily the unbreakable translucent teflon is  applied.
  • The inert teflon is not affected by chemicals avoiding the sample to be contaminated by the equipment.
  • The plunging siphon is heat resistant to a temperature of 250°C.
  • After removal of the narrowing cones a plunging siphon can be cleaned easily.
  • The plunging siphons are supplied in a long (180 cm) and a short (90 cm) design inclusive narrowing cones for liquids with different viscosity, and with a protective tube.






Tank Bottom Sampler
Eijkelkamp 12.47 Tank Bottom Sampler

Product Features
 
  • Made of stainless steel.
  • Eijkelkamp 12.47 Tank Bottom Sampler used for indicative sampling of liquids on the bottom of a reservoir (one cable) or higher (two cables).
  • Constructed in such a way that when it touches the bottom of a tank or reservoir it will be filled with liquid from the bottom of that tank.
  • It is only for indication.
  • Has a length of 39 cm and a diameter of 28 mm, contents 110 ml.






Flap Gouge Auger
Eijkelkamp 20.07 Flap Gouge Auger

Product Features
 
  • For depth specific sampling in dry or wet material
  • Eijkelkamp 20.07 Flap Gouge Auger standard set for sampling to a depth of 2 m
  • An apparatus for depth specific sampling in dry or wet firm material.
  • The slender construction enables easy penetration of (top) layers.
  • In this way the sample can be taken at a specific depth.
  • Not suited for use in hard soils or similar material.
  • Very useful for  taking samples in drums, tanks, bags and big bags from for instance powder, grain, granulates (< 3 mm) and pastes.
  • The standard set consists of a stainless steel flap gouge auger, a top piece, extension rods and various accessories.
  • The whole can be transported in a solid carrying bag.






Eijkelkamp Grundfos MP 1

Product Features
  • The ultimate 2” submersible pump for purging and sampling monitoring wells up to a depth of 85 meters.
  • Submersible pump MP1, centri- fugal type f. purging/sampling monitoring wells
  • Stainless steel 316
  • Pressure head lift max. 86 m
  • Adjust. cap. till max. 1.8 m3/h, 220 V 1.1 kW, for connection to frequency converter
  • Pump Ø 45 mm
  • 287 mm long
  • Teflon cable 20 m                                 






Eijkelkamp Grundfos MP 1 submersible pump sets

Product Features
  • Designed for purging and sampling monitoring wells with a diameter of at least 50 mm and a depth to 90 meters.
  • The pump motor is controlled by a special adjustable frequency converter.
  • Since the frequency is continuously adjustable, the capacity of the Grundfos MP 1 pump can be controlled from 0 to 2 m3/hour.
  • This creates a constant flow of anaerobic water.
  • High pumping capacity for purging, slow pumping for sampling
  • Easy to install; mobile
  • Resistant to corrosive liquids
  • The pumped material only comes into contact with stainless steel and Teflon
  • Anaerobic sampling
  • Simple cleaning procedures