Water Quality Testing

   
««First   «Prev   [1]  [2]  [3]  [4]  [5]  [6]  [7]  [8]  [9]  Next»  Last»»
Algae Online Analyser
BBE Algae Online Analyser

Product Features
 
  • BBE Algae Online Analyser is online chlorophyll analysis for measuring stations as well as for laboratory use.
  • Simultaneous determination of chlorophyll concentration, photosynthetic activity of chlorophyll and transmission.
  • Determination of different algae classes by excitation using coloured LEDs.
  • Calculation of the content of green algae, blue-green algae (cyanobacteria), brown algae (diatoms and dinoflagellates) and cryptophytes.
  • Direct measurement without sample preparation.
  • The photosynthetic activity of chlorophyll are calculated according to the Genty parameter method
  • Yellow substances measurement (CDOM) to correct the calculation of the content of chlorophyll.
  • Integrated cleaning unit to prevent growth of biofilms during prolonged measurements.
  • Can be switched from flow-through measurement to single measurement mode for laboratory operation






Glass Bodied pH Sensor
TPS Glass Bodied pH Sensor

Product Features
 
  • Glass body combination pH sensor.
  • TPS Glass Bodied pH Sensor the Annular junction makes this sensor suitable for general purpose use as well as for slurries.
  • pH range: 0 to 14 pH
  • Temperature Range: 0 to 80 OC (32 to 176 OF)
  • Reference System: Ag/AgCl, with Annular Ceramic junction
  • Dimensions: 120 x 12 mm 






General Purpose Laboratory & Field pH Sensor
TPS General Purpose Laboratory & Field pH Sensor

Product Features
 
  • TPS General Purpose Laboratory & Field pH Sensor epoxy body combination pH sensor, with screw-on membrane guard.
  • The Porous Teflon reference system makes this sensor suitable for most water samples, excluding Slurries, Soil Suspensions and other solutions that can clog reference junctions.
  • pH range: 0 to 14 pH
  • Temperature Range: 0 to 60 OC (32 to 140 OF)
  • Reference System: Ag/AgCl, double junction with Porous Teflon junction.
  • Dimensions: 120 x 12 mm

 







Submersible pH Sensor
TPS Submersible pH Sensor

Product Features
 
  • TPS Submersible pH Sensor epoxy body combination pH sensor, with integral membrane guard.
  • Submersible to 50 metres.
  • pH range: 0 to 14 pH
  • Temperature Range: 0 to 60 OC (32 to 140 OF)
  • Reference System: Ag/AgCl, single junction with Porous Teflon junction.
  • Dimensions: 120 x 12 mm






Intermediate Junction pH Sensor
TPS Intermediate Junction pH Sensor

Product Features
 
  • Epoxy body combination pH sensor, with unique Intermediate Junction reference design.
  • The sleeve at the end of the sensor can be removed for cleaning.
  • TPS Intermediate Junction pH Sensor suitable for difficult samples such as slurries that could block other reference junctions. 
  • Two sleeves are provided - one with protective forks (as shown), and a narrow sleeve suitable for insertion into meats and cheeses.
  • pH range: 0 to 14 pH
  • Temperature Range: 0 to 60 OC (32 to 140 OF)
  • Reference System: Ag/AgCl, with Intermediate Junction reference.
  • Dimensions: 120 x 12 mm (diameter of spear sleeve is 8mm)






hydroCHEM
TPS hydroCHEM

Product Features
 
  • Waterproof construction rated to IP65.
  • Conductivity and pH Controller
  • TPS hydroCHEM supplied with 24V DC output control cable for low-powered devices or relay etc.
  • Memory for 2300 stored readings, with automatic datalogging facility (optional).
  • RS232 Interface for remote monitoring of system (optional).
  • Pump sensor only allows automatic dosing when circulating pump is on.
  • Large digit mode makes the data easy to read in any light or from a distance.
  • Automatic calibration
  • 4 Terminal conductivity sensor technology resists fouling for maximum reliability.
  • User can choose readout in mS/cm, CF units, dS/M or ppM (TDS).
  • Temperature readout with optional temperature control output.
  • Fully adjustable ON and OFF times can be set separately for Conductivity and pH pumps, eliminating over-dosing.
  • User can select acid or alkali addition.
  • Password protection, so only qualified users can change set-up or calibration.
  • Good laboratory practices (GLP) function brings analytical Q.A. to the hydroponics farmer.
  • Instant recall of current calibration and system set-up information.
  • 24 Hour calendar clock (optional).
  • Emergency shutoff timer shuts off Conductivity and pH pumps if they operate continuously for user-set time.
  • Operates off a single AC/DC power supply. No electrical installation required.
  • Quick dose function.

 







Micro pH Sensor
TPS Micro pH Sensor

Product Features

  • Glass body combination pH sensor, with 4.5mm diameter tip.
  • TPS Micro pH Sensor pH range: 0 to 14 pH
  • Temperature Range: 0 to 80 OC (32 to 176 OF)
  • Reference System: Ag/AgCl, with Ceramic Frit junction.
  • Dimensions: 120 mm Total length, 80 x 12 mm main body, 40 x 4.5mm tip, Sensor must be immersed to at least 10mm for correct operation.

 







WP-81
TPS WP-81

Product Features
 
  • TPS WP-81 Waterproof Conductivity/TDS-pH/mV-Temperature Meter
  • Fully waterproof to IP67 rating.
  • The case, keypad and connectors are designed for maximum durability in the harshest conditions.
  • The 32 character alphanumeric display features a user-friendly menu system.
  • Full text prompting and error messages are provided.
  • The date and time are recorded with every reading, when using the Notepad and AutoLog functions.
  • Logging interval from 1 minute to 24 hours.
  • Can log up to 2400 readings, along with the date and time.
  • RS232 serial port interface.
  • All readings stored in memory and GLP information can be downloaded to a PC or printer.
  • WinTPS Windows software allows the WP Series to communicate with a PC for data download.
  • Supplied with a rechargeable NiMH battery and charger as standard.
  • Chargers for all countries are available.
  • For extended field trips a solar panel, or a charger lead for a car cigarette lighter socket are also available.
  • Certified in accordance with the AS/NZS ISO 9001 standard.






proCHEM-T
proCHEM-T

Product Features
 
  • proCHEM-T is temperature controller with dual set points.
  • One point set to control the process, and a second point beyond that set to activate an alarm.
  • Dual Set Points are provided.
  • Separate LED's indicate when either of the Set Points has been exceeded.
  • The output relays are rated to 240V and are fused at 2 Amps.
  • Higher currents can be switched with an external contactor.
  • Easy to install.
  • Housed in a rugged plastic case which is non-corrosive, waterproof and dustproof to IP65.
  • The large LCD display is easy to read, even from a distance.
  • Designed for maximum flexibility.
  • 4 to 20 mA and 0 to 1 V DC outputs are provided as standard.
  • Certified in accordance with AS/NZS ISO9001 standards.






Flat Ended pH Sensor
TPS Flat Ended pH Sensor

Product Features
 
  • TPS Flat Ended pH Sensor epoxy body combination pH sensor with flat membrane and reference for measuring pH of flat surfaces.
  • pH range: 0 to 14 pH
  • Temperature Range: 0 to 80 OC (32 to 176 OF)
  • Reference System: Ag/AgCl, with Porous Teflon junction
  • Dimensions: 120 x 12 mm