WindObserver 70
Gill WindObserver 70 – Reliable Wind Measurement for the World’s Harshest Conditions
- Best ultrasonic wind sensor for freezing conditions
- WindObserver 70 for AWOS systems
-
Aviation-grade ultrasonic wind sensor
The WindObserver 70 is a rugged, heated, solid-state ultrasonic anemometer designed especially for aviation and extreme environments. It has a wind speed range from 0 to 70 m/s and delivers full 360° wind direction with no dead band, high precision (≈ ±2% at 12 m/s for speed, ±2° for direction), and fine resolution (≈ 0.01 m/s; 1°). It is built with stainless steel 316 housing, rated IP66 for harsh outdoor exposure, and offers an enhanced anti-icing heating system (≈ 150 W head heating) to ensure operation in icing conditions and down to approx −55 °C. DC power is required (≈9-30 V) with optional heating (7 A @ 24 VAC or DC), and it supports output formats via RS-422/RS-485 with selectable baud rates, status reporting, and configurable output formats (NMEA, UV, Polar, etc.). The unit comes with aviation certifications from FAA & CAA for use in reporting surface winds under AWOS systems, minimal maintenance (no moving parts) and optional WMO-style averaging/gust measurement capabilities.
- Heating power 7A @24VAC or DC (1W/cm2)
- 0-70m/s wind speed range
- FAA & CAA accepted* for airport applications
- Calibration traceable to national standards
- IP66 rated stainless steel construction
- Optional base mounts/cable exit
- 0-360º wind direction range (no dead band)
- Averaging/gusts to WMO guidelines
- Aviation Weather Observing Systems
- Aircraft Landing Systems
- Remote Meteorological Systems
- Helicopter Landing Pads
- Transport Safety
WIND SPEED |
|
| Range | 0 - 70 m/s (0-156mph) |
| Accuracy |
±2% @12 m/s |
| Resolution | 0.01 m/s |
| Starting Threshold | 0.01 m/s |
| Offset | 0.01 m/s |
DIRECTION |
|
| Range | 0 - 360° |
| Dead band direction | None |
| Accuracy |
±2° @12 m/s |
| Resolution |
1° |
MEASUREMENT |
|
| Ultrasonic output rate |
1 - 4Hz |
| Parameters | UV, Polar, NMEA |
| Units | m/s, knots, mph, km/h, ft/min |
| Average (Selectable) | Rolling average - 1, 2, 10 m.n, Gust - 3s |
| Block average | 0-3600s |
DIGITAL OUTPUT |
|
| Communication | RS422/RS485 full duplex/half duplex |
| Baud rates |
1200, 2400, 4800, 9600, 19200, 38400 |
| Formats |
8-bit data; odd, even or no parity |
| Anemometer status | Supplied as part of standard message |
MECHANICAL |
|
| External Construction | Stainless steel 316 |
| Size |
Refer to diagram overleaf |
| Weight |
1.7kg (with 2m cable) 1.3kg (with connector) |
ENVIRONMENTAL |
|
| Protection Class |
IP66 (NEMA4X) |
| Humidity | 0% to 100% RH |
| Operating Temperature | -55°C to +70°C (Heated option) |
| Precipitation | 300mm/hr |
| EMC | EN 61326-1: 2013, EN60945:2002 |
| Icing | MILSTD810F Method 521.2 Procedure I |
POWER REQUIREMENT |
|
| Anemometer only | 9 - 30 VDC (60mA max, 50mA average) |
| Heating | Max 7A @24 VAC or DC |
APPROVALS |
|
| Standards | Traceable to national standards |
| Site Calibration | None required. Integrity check unit (Zero wind) supplied as optional extra |
1. Where can I buy the Gill Instruments WindObserver 70 Ultrasonic Anemometer in Malaysia?
You can purchase the Gill Instruments WindObserver 70 Ultrasonic Anemometer directly from Surechem Sdn. Bhd., the authorized distributor for Gill Instruments in Malaysia.
📍 Address: 35, Jalan Radin Anum 2, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Wilayah Persekutuan Kuala Lumpur
📞 Contact: 03-9058 6626
📧 Email: surechem@surechem.com.my
We supply genuine Gill Instruments products for industrial, meteorological, and research applications.
2. Does the WindObserver 70 come with a warranty?
Yes. All Gill Instruments WindObserver 70 sensors supplied by Surechem Sdn. Bhd. include a 1-year manufacturer’s warranty covering manufacturing defects. Please retain your invoice for warranty validation or contact us for support.
3. Is technical support available in Malaysia?
Yes, Surechem Sdn. Bhd. provides complete local technical support for all Gill Instruments products. Our team can assist with installation setup, integration with monitoring systems, troubleshooting, and after-sales service.
4. Does the WindObserver 70 require maintenance or calibration?
The WindObserver 70 Ultrasonic Anemometer is durable and built for reliable long-term operations. However, regular inspection and calibration are advised to ensure continued accuracy, especially for safety-critical applications. Surechem Sdn. Bhd. can arrange calibration and verification services locally in Malaysia.
5. How can I request a quotation or product brochure?
To request a quotation, product datasheet, or calibration service, please contact:
📞 03-9058 6626 | ✉️ surechem@surechem.com.my | 🌐 https://www.surechem.com.my/
Our sales team will provide detailed pricing, stock availability, and technical documentation promptly
