WindObserver IS
Gill WindObserver IS – Intrinsically Safe Ultrasonic Wind Sensor for Hazardous Areas
- Explosion-proof wind sensor
- Solid-state wind sensor IS version
- Wind sensor for ATEX Zone 1 and Zone 2
The Gill WindObserver IS is an intrinsically safe ultrasonic wind sensor specifically designed for accurate and reliable wind measurement in hazardous or explosive environments. Built with 316 stainless steel and certified to ATEX and IECEx standards, it provides safe operation in areas such as offshore platforms, petrochemical sites, and industrial zones with flammable gases. The sensor measures both wind speed and direction with no moving parts, reducing maintenance needs and improving long-term performance. With its IP66-rated housing, optional heating system, and digital output options like RS422 and RS485, the WindObserver IS delivers dependable data in extreme weather and safety-critical applications. It is the ideal choice for industries that demand durability, precision, and explosion-proof certification in one compact device.
- Intrinsically safe: ATEX, IECEx & UKEX certification
- Low voltage or optional mains power supply
- Galvanic isolation
- ASCII or NMEA serial output
- 0-75m/s wind speed operation
- Averaging/gusts to WMO guidelines
- Tested for exposed environments (IP66, BS EN 60945)
- Low maintenance requirements.
- Offshore oil production and drilling platforms
- Support tankers
- Onshore petrochemical plants
- Helidecks in hazardous environments
- Paint spray booths
- Precision wind speed and direction measurement in hazardous environments
- Reduced offshore maintenance costs
- Easy to install and long operational life
- Proven service internationally
WIND SPEED |
|
| Range | 0-75 m/s |
| Accuracy |
12 m/s 2% RMSE |
| Resolution | 0.01 m/s |
| Starting Threshold | 0.01 m/s |
| Units of measurement | m/s, km/h, mph, kts, ft/min |
WIND DIRECTION |
|
| Range | 0 - 360° |
| Units of measurement | degrees |
| Accuracy |
±4° RMSE |
| Resolution |
1° |
MEASUREMENT |
|
| Ultrasonic output rate |
1 Hz, 2 Hz or 4 Hz |
| Parameters | UV and polar |
| Units | m/s, knots, mph, km/h, ft/min |
| Averaging | 0-3600 seconds |
OUTPUT |
|
| Digital comms modes?? | RS422, full duplex to LVPCI |
| Baud rates |
1200, 2400, 4800, 9600, 19200 |
| Formats |
8-bit data; odd, even or no parity |
| Anemometer status | Supplied as part of standard Gill message (NMEA output includes V and A codes as part of the message) |
| Protocols | ASCII, NMEA 0183 |
MECHANICAL |
|
| External Construction | Stainless steel 316 |
| Size |
380 mm x 210 mm |
| Weight |
1.9 kg |
ENVIRONMENTAL |
|
| Moisture protection |
IP66 |
| Humidity | 0% to 100% RH |
| Operating Temperature | -30°C to +70°C |
| Precipitation | 300mm/hr |
| Storage temp | -50°C to +75°C |
POWER SUPPLY |
|
| Anemometer | 6-12 VDC, 30 mA peak (from LVPCI) All circuits protected to 0.8 joules |
CERTIFICATION & APPROVALS |
|
| Instrinsic safety | ATEX, IECEx & UKEX certification. Certificates available to view in full on gillinstruments.com |
1. Where can I buy the Gill Instruments WindObserver IS Ultrasonic Anemometer in Malaysia?
You can purchase the Gill Instruments WindObserver IS Ultrasonic Anemometer directly from Surechem Sdn. Bhd., the authorized distributor for Gill Instruments in Malaysia.
📍 Address: 35, Jalan Radin Anum 2, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Wilayah Persekutuan Kuala Lumpur
📞 Contact: 03-9058 6626
📧 Email: surechem@surechem.com.my
We supply genuine Gill Instruments products for industrial, meteorological, and research applications.
2. Does the WindObserver IS come with a warranty?
Yes. All Gill Instruments WindObserver IS sensors supplied by Surechem Sdn. Bhd. include a 1-year manufacturer’s warranty covering manufacturing defects. Please retain your invoice for warranty validation or contact us for support.
3. Is technical support available in Malaysia?
Yes, Surechem Sdn. Bhd. provides complete local technical support for all Gill Instruments products. Our team can assist with installation setup, integration with monitoring systems, troubleshooting, and after-sales service.
4. Does the WindObserver IS require maintenance or calibration?
The WindObserver IS Ultrasonic Anemometer is durable and built for reliable long-term operations. However, regular inspection and calibration are advised to ensure continued accuracy, especially for safety-critical applications. Surechem Sdn. Bhd. can arrange calibration and verification services locally in Malaysia.
5. How can I request a quotation or product brochure?
To request a quotation, product datasheet, or calibration service, please contact:
📞 03-9058 6626 | ✉️ surechem@surechem.com.my | 🌐 https://www.surechem.com.my/
Our sales team will provide detailed pricing, stock availability, and technical documentation promptly.
