Electro-hydraulic Load Cells for Steel Linings and Struts
The Electro-hydraulic Load Cells for Steel Linings and Struts is used to monitor stresses in steel linings, struts, piles and support beams. They consist of a pressure pad connected to a pressure transducer. The pressure pad is composed by two stiff stainless steel plates saturated by de-aired oil. Special distribution plates are also available for better load distribution between two not-parallel surfaces. Electric cable connects the load cells to a suitable remote readout system.
| Model | 0L2CE019000 | 0L2CE030000 |
|---|---|---|
| Range | 1900 KN | 3000 KN |
| Overall size (ODxLxH) | 209x365x36.5 mm | 264.5x421x36.5 mm |
| Accuracy (linearity, hysteresis and repeatibility) | < 1% FS | < 1% FS |
| Signal output | 4-20 mA (current loop) | 4-20 mA (current loop) |
| Temperature operating range | from -20°C to +80°C | from -20°C to +80°C |
| Protection Class | IP 68 up to 100 KPa | IP 68 up to 100 KPa |
| Material | stainless steel | stainless steel |
| Sensor resolution | 0.15 KN | 0.20 KN |
| Power supply | from 9 to 30 V DC | from 9 to 30 V DC |
