MJK Magflux Electromganetic Flow Meter

With MJK's MagFlux electromagnetic flowmeter, you can measure flow in electrically conductive liquids in closed, pressurized pipe systems with great precision. MagFlux measures full accuracy at a fluctuation of 0.25% down to a speed of 0.2 m/sec. This not only ensures a high accuracy at low flow, but it also expands the flowmeter's dynamic measurement range. This is why high precision is also obtained even when measurements large areas.

MagFlux for fully running pipes has no moving parts, which offers the advantage that the flowmeter does not affect the pressure conditions of the pipe system. The modern modular design is flexible and can be used to measure many types of flow in conductive fluids. Due to the high data reliability, the flow meter is used widely to eliminate water waste due to leakage and as flow measurement of wastewater.

MJK sensors are easy to install. They are designed according to installation lengths ISO standards. To obtain highly qualified measurements, you just need 3x diameter straight pipe in the inlet direction and 2x diameter in the outlet direction. The sensor meets this goal for many of the smaller dimensions, giving you flexible installation options.

MagFlux flowmeters, converters and displays are produced in stainless steel and fiberglass-reinforced polyester, and therefore provide maximum protection against the environmental challenges faced by the equipment. Our measuring instruments cover a wide range of installation types and are developed with competitive specifications, so they can be combined in different way to meet specific requirements.

Display Unit  

Enclosure Rating Dust- and waterproof IP 67, NEMA 6 (when mounted on Converter)
Indication Indication of flow, flow direction, volume, totalizers, configuration and graph
Communication MODBUS® RTU-mode, 9600 baud, 2-wire RS 485, master-mode
Memory 32Mb Flash Memory, 345.000 entries with date, time and value
Interface USB 1,1 type mini B, Female

 

Converter  

Accuracy ± 0,1% of reading
Measuring Range Min. range = 0 - 0,2 m/s - Max. range = 0 - 10 m/s
Analog Output One active 4 - 20 mA, galvanically isolated (max. load 800 Ω)
Communication MODBUS® RTU-mode, 9600 baud, 2-wire RS 485, slave-mode
Power Supply 24 V AC, 50 / 60 Hz ± 10 % or 115 V AC, 50 / 60 Hz ± 10 % or 230 V AC, 50 / 60 Hz ± 10 %
Enclosure Rating IP 67, NEMA 6

 

Sensor

Mounting Flange EN-1092-1 / ANSI B 16.5 / AWWA C207-01 28"-54" / AS 4087-2004 & AS 2129-2000
Housing Carbon steel, stainless steel
Flanges Carbon steel, stainless steel
Accuracy Better than ± 0,25 %