Compact multi-channel data logger with an integrated cellular modem optimised for use in level tubes from Ø 2"

Low power consumption through intelligent power management = longer battery life = lower maintenance intervals = lower operating costs.

Low maintenance:
Powered by standard 1.5 V Size C batteries, or 3.6V lithium batteries for longer life. The battery replacement is carried out in no time and without the need for special tools.

Ideal for small diameter pipes and for underground measurement sites. Comparative measurements with an electric contact gauge can be performed without removing the SlimlogCom.

Upon reaching the predefined event thresholds, e.g. in the case of flooding, the SlimLogCom automatically shortens both the measurement and the transmission intervals, and an alarm SMS will be sent to up to eight recipients.

Two APPs are available for configuration and data read-out of the SlimLogCom. Operating software for beginners SEBAConfig (Windows) has a convenient (Wizard). Using the SEBA SEBAConfigAPP (Android, iOS) together with the SEBA BlueCon Bluetooth module it is convenient to communicate via Bluetooth with a smartphone or tablet and the data logger.

Last but not least:
With the password-protected web portal SEBA Hydrocenter data is not only safe, but also accessible at any time on the road or from thee office. Alternatively, there is also the possibility of simple data provision on a secure SEBA FTP server.



32Bit Flash controller with integrated WatchDog RTC-IC Real-Time Clock

Memory Capacity 16 MB (= 1.120.000 readings)
Save Interval 2min - 99 hours
Channels Max. 32 
Measurement Routines Single value, Average value, Event clock, Delta mode
Communication Interface RS232 (standard), Bluetooth (optional)

Interface cable (USB/RS232)

BlueCon (Bluetooth)


Digital: 1 x RS485 (SHWP) for digital SEBA sensors, 1 x pulse

Analog: 2 x 0-1V, 0/4-20mA



Material Aluminium
Dimensions Ø35 x 420mm (incl. antenna)
Protection Class IP67 (Standard), IP68 (optional)


Modem 4G

Frequencies 800/900/1800/2100/2600 MHz (Worldwide)
Current Consumption 140mA/12V send/receive; 10mA idle
Antenna Dual band, plugged, SMA connector, robust and weather-resistant 
3db angle rod antenna (optional)
Special rod antenna for underground installation (optional)
Puck antenna (optional)

Push protocols: either ZRXP/D channel /csv

Data retrieval protocol: SHWP

SMS data delivery: Binary

SMS alarm: SMS to up to 8 recipients



Power Supply

4 x 1.5V alkaline manganese batteries (standard)

4 x 3.6V Lithium size C batteries (optional, SlimCom type, extended battery life)

Operating Temperature -40°C - +70°C
Unit Suspension

Diameter-independent, for SEBA caps starting from a 2" diameter pipe diameter (standard)

a "Smart-KIT" suspension unit starting from 4" tube diameter incl. strain relief for a special measuring cable (Q2/16)

Measuring Device Protection Protective cap for RS232 interface (dust and moisture protection)