MPS-D3 Multiparameter Sensor
Robust, pluggable multi-parameter sensor of 1.4404 stainless steel, accommodating up to three sensors
Individually configurable:
Depending on the measurement task, the MPS-D3 can be equipped with up to three water-quality sensors (parameters: pressure, temperature and conductivity).
Robust:
Standard version of 1.4404 stainless steel, optionally available in titanium for extreme operating conditions, e.g. for swelling pressure measurements of up to 80 bar.
Variable:
The proven and robust SEBA-connect feature of the MPS-D3 allows both the connection to mobile handsets (SEBA KLL-Q-2 Type electric water level gauge (KLL), Checker-2) or to stationary data collectors with (UniLogCom, LogCom/FlashCom) and without data transmission (Qualilog8).
Water Level
| Sensor | Relative pressure probe |
|---|---|
| Measuring Principle | Capacitive with ceramic measurement cell |
| Measuring Range | 0-2 / 1 /4/ 5/ 20/ 40/ 100 / 200m Water column or according to specification |
| Measuring Accuracy | ± 0.1% FS |
| Long Term Stability | ± 0.1% / year |
Water Temperature
| Sensor | NTC30 with polynomial linearization |
|---|---|
| Measuring Principle | NTC resistor |
| Measuring Range | -5 - + 50 ° C |
| Measuring Accuracy | 0.1 ° C |
| Pressure Range | 0 - 50 bar |
Conductivity
| Sensor | 4-electrode measuring cell |
|---|---|
| Measuring Range | 0-200mS / cm (total) automatic |
| Measuring Accuracy | ± 1μS / cm at measuring range 0-200μS / cm; +/- 0.5% with measuring range 0.2-200mS |
| Pressure Range | 0 - 50 bar |
*Other parameters are possible to be measured using MPS-D3. Please refer to the brochure.
